Page 1 of 1
Core temps missing on Ryzen on system startup + freezing
Posted: Sun Apr 26, 2026 4:26 pm
by MDKpt
also bare in mind every reboot for me have to close and open becouse it only shows the ccd´s
after closing and open again every thing is normal
also like the beta of 1.19 it sometimes says program not responding
Re: Core temps missing on Ryzen on system startup + freezing
Posted: Sun Apr 26, 2026 4:32 pm
by The Coolest
Try this test build, I think it should fix the freezing part.
https://www.alcpu.com/CoreTemp/CoreTemp-1-20-1-x64.zip
Regarding the no core temps after a reboot, I could not reproduce this on my Ryzen systems and need some help debugging it.
First, disable Core Temp's start with Windows option, then shut down and restart your computer.
Start "Debug View" as admin with everything under the "Capture" menu checked.
Https://learn.microsoft.com/en-us/sysin ... /debugview
Start Core Temp and make sure that the issue is reproduced, in Debug View you should see some new output. Then you can close Core Temp, restart it and see that it starts normally. Then save the log and close Debug View.
Post or email the Debug View log file to me.
Re: Core temps missing on Ryzen on system startup + freezing
Posted: Mon Apr 27, 2026 3:13 am
by limitz
I am experiencing the same not starting with windows issue. However, I do not have freezing
Re: Core temps missing on Ryzen on system startup + freezing
Posted: Mon Apr 27, 2026 2:39 pm
by limitz
The Coolest wrote: ↑Sun Apr 26, 2026 4:32 pm
Try this test build, I think it should fix the freezing part.
https://www.alcpu.com/CoreTemp/CoreTemp-1-20-1-x64.zip
Regarding the no core temps after a reboot, I could not reproduce this on my Ryzen systems and need some help debugging it.
First, disable Core Temp's start with Windows option, then shut down and restart your computer.
Start "Debug View" as admin with everything under the "Capture" menu checked.
Https://learn.microsoft.com/en-us/sysin ... /debugview
Start Core Temp and make sure that the issue is reproduced, in Debug View you should see some new output. Then you can close Core Temp, restart it and see that it starts normally. Then save the log and close Debug View.
Post or email the Debug View log file to me.
I have sent the log to your Admin e-mail. Hope it helps.