Running v1.0 rc3 on win7 pro 64bit.
Your wonderful tool was working flawlessly for over a month.
Then I am hit with one of MSFT's wonderful auto-update cycles, and now coretemp fails immediately with the message "Driver has failed to load. This program will not continue." Doesn't matter if I run as a normal user or as a sysadmin.
Googled around for nearly an hour and found no useful/current solutions for this one.
Help???
Thanks in advance.
David
Coretemp suddenly stopped working "driver failed to load"
-
- New User
- Posts: 2
- Joined: Thu Feb 13, 2014 1:44 am
-
- New User
- Posts: 2
- Joined: Thu Apr 17, 2014 11:31 am
Re: Coretemp suddenly stopped working "driver failed to load
I have had this same issue arise after a Windows Update last week... Please help!
-
- New User
- Posts: 2
- Joined: Thu Feb 13, 2014 1:44 am
Re: Coretemp suddenly stopped working "driver failed to load
I figured out my issue: I had encrypted the windows temp directory in win7 (this, for information security purposes on a laptop)...but that confused coretemp and made it blow up. Un-encrypting that directory made coretemp come back to life.
Doubt that is the issue that you expereienced due to a windows update (I'm up to date on win764 bit pro and running fine now.
Doubt that is the issue that you expereienced due to a windows update (I'm up to date on win764 bit pro and running fine now.
-
- New User
- Posts: 2
- Joined: Thu Apr 17, 2014 11:31 am
Re: Coretemp suddenly stopped working "driver failed to load
Thanks, but you're right - that's not the same issue for me. So the mystery continues. I suppose I will simply uninstall to cure the problem.