ALCPU Forums

Hi,

I have new xeon workstation with following spec

2 X Xeon 5650 6 core 2.67 ghz.
Intel S5520SC workstation motherboard
GTX 465
8GB Ram ECC

Now I have disabled 1 core in MSCONFIG dialog box just beacuse 3ds max dosnt work with 24 cores, so I have 23 cores in windows.
The Problem is Core - temp dosnt work in with 23 cores, it dosnt start.

but lets say I enable all 24 cores or diable HT then it works.

Please address this issue

I will look into it.
23 cores with HT = broken
And with any other configuration = works
Is that correct?

Could you please provide a register dump from Core Temp?