ALCPU Forums

Hi There,

RC2 is working like a dream in terms of no tj. max jumps.

Thanks you very much for a spoeedy resolution!

Cheers

Chewie

Core Temp 1.0 64bit
Intel Core i5 2500K (Sandy Bridge)
While running CPU stress test (Orthos Beta) on all 4 cores, Core Temp shows Max as = to the Tj.Max (98C) after the test is running a few minutes. I can reset the Min/Max, and the Max reverts to normal temps, but returns to 98C for all cores after 2-3 minutes. The "real-time" temps for the individual cores always appear to be normal (40-52C) but occasionally I do see a yellow temp flash by showing "98C?" and then the temp returns immediately to a normal temp. I assume these yellow temps (always 98C) are why the Max shows 98C. There is never a ! that appears next to any of the core temps.

Is this an indication that the cores are actually reaching 98C? or is this a problem with Core Temp for my particular processor?

Screenshot attached

Managed to get a screenshot with the yellow 98C flashing by...

It looks like you're using RC1, which had this bug.
I suggest you update to RC2, it will fix this problem.

PS. Thread merged with the main thread about this issue.

This issue happens to me everytime I open Skype

EDIT: Now I updated to 1.0 RC2 an will watch if it happens again. But where can I see that I installed RC2? In the About tab you can only see 1.0 64 bit.

Only by looking at the file date, should be dated September 2nd.

Yes it is. Created today, 6th October 2011. And edited Friday 2nd September 2011 0:29

That's RC2 then