PAGE_FAULT_IN_NONPAGED_AREA
coretemp R5 BSOD
ALSYSIO64.SYS is the cause of much grief, causing a BSOD every couple boots. I'm on Win7 64-bit. Processor is FX-8350. R4 worked fine for me but I upgraded earlier this week, and I can't find an R4 build online again.
-
nOm nom NOM3
- New User
- Posts: 1
- Joined: Thu Sep 19, 2013 10:37 pm
- Location: Central USA
Re: PAGE_FAULT_IN_NONPAGED_AREA
I also have this error, It doesn't occur every boot however it it totally a deal breaker. ill wait till it gets fixed
Processor: AMD FX-8120 8 core
Mobo: Asus sabertooth 990FX r2.0
Coretemp: 1.0 RC5
Processor: AMD FX-8120 8 core
Mobo: Asus sabertooth 990FX r2.0
Coretemp: 1.0 RC5
Re: PAGE_FAULT_IN_NONPAGED_AREA
Same issues, I posted in the other thread - RC5 and Asus M5A97 EVO + AMD FX-8350 Blue Screens with PAGE_FAULT_IN_NONPAGED_AREA.
Re: coretemp R5 BSOD
RC4 is available on 4shared.com, however it is the InstallIQ version...MrGrumpy wrote:ALSYSIO64.SYS is the cause of much grief, causing a BSOD every couple boots. I'm on Win7 64-bit. Processor is FX-8350. R4 worked fine for me but I upgraded earlier this week, and I can't find an R4 build online again.
-
The Coolest
- Site Admin
- Posts: 3404
- Joined: Tue Feb 18, 2003 7:48 pm
- Location: Tel Aviv, Israel
- Contact:
Re: PAGE_FAULT_IN_NONPAGED_AREA
Core Temp has been updated, and the issue of this thread should be fixed now.
Here are the changes in this release:
Version 1.0 RC6 - 9th October, 2013
- New: Digital signature. Core Temp is digitally signed by 'Artur Liberman', it is now easy to tell that you have a genuine copy of Core Temp.
- New: Update Checker. Core Temp can now notify you when a new version is available.
- New: You can now hide the taskbar button and use the system tray icons to pop the window back up.
- New: Added support AMD's new Richland APU.
- New: Added support for Intel Haswell and Ivy Bridge-EP CPUs.
- New: Preliminary support for Bay Trail-T Atoms.
- Fix: BSOD on some Windows 7/8 + UEFI enabled machines.
- Fix: AMD FX system freezes/crashes/BSOD.
- Fix: Driver failure when closing Core Temp on another Windows user account.
- Fix: Corrected detection of certain Xeon processors.
- Update: Ram utilization notification icon added to the Settings --> Notification Area.
- Update: Logitech G15 applet now supports CPUs with up to 10 cores.
- Update: System tray icons' tooltips now display their respective core information.
- Update: Log file will now also contain power consumption.
- Update: Log file will now keep track of each core on AMD CPUs as well.
Here are the changes in this release:
Version 1.0 RC6 - 9th October, 2013
- New: Digital signature. Core Temp is digitally signed by 'Artur Liberman', it is now easy to tell that you have a genuine copy of Core Temp.
- New: Update Checker. Core Temp can now notify you when a new version is available.
- New: You can now hide the taskbar button and use the system tray icons to pop the window back up.
- New: Added support AMD's new Richland APU.
- New: Added support for Intel Haswell and Ivy Bridge-EP CPUs.
- New: Preliminary support for Bay Trail-T Atoms.
- Fix: BSOD on some Windows 7/8 + UEFI enabled machines.
- Fix: AMD FX system freezes/crashes/BSOD.
- Fix: Driver failure when closing Core Temp on another Windows user account.
- Fix: Corrected detection of certain Xeon processors.
- Update: Ram utilization notification icon added to the Settings --> Notification Area.
- Update: Logitech G15 applet now supports CPUs with up to 10 cores.
- Update: System tray icons' tooltips now display their respective core information.
- Update: Log file will now also contain power consumption.
- Update: Log file will now keep track of each core on AMD CPUs as well.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.
Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.
Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
Re: PAGE_FAULT_IN_NONPAGED_AREA
I updated to version RC6 but the cpu frequency is wrong because it indicates 3.9 ghz instead of 4.0 ghz. Why?
-
The Coolest
- Site Admin
- Posts: 3404
- Joined: Tue Feb 18, 2003 7:48 pm
- Location: Tel Aviv, Israel
- Contact:
Re: PAGE_FAULT_IN_NONPAGED_AREA
Please post a screenshot and a register dump (look in Tools menu).
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.
Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.
Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
Re: PAGE_FAULT_IN_NONPAGED_AREA
Here they are
You do not have the required permissions to view the files attached to this post.
-
The Coolest
- Site Admin
- Posts: 3404
- Joined: Tue Feb 18, 2003 7:48 pm
- Location: Tel Aviv, Israel
- Contact:
Re: PAGE_FAULT_IN_NONPAGED_AREA
Note the multiplier, it's x20.5. In the register dump it's at x21 making it 4ghz. The issue isn't with core temp, but the processor changing the multiplier for some reason.
Bring up the Core Temp window and look at the cores and their frequencies. There is 0% load on your CPU, maybe it's throttling back to save on power?
Bring up the Core Temp window and look at the cores and their frequencies. There is 0% load on your CPU, maybe it's throttling back to save on power?
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.
Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.
Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
Re: PAGE_FAULT_IN_NONPAGED_AREA
I do not understand, I enclose another screen shot, look please
You do not have the required permissions to view the files attached to this post.
Re: PAGE_FAULT_IN_NONPAGED_AREA
I solved it by setting it to 5 ghz and then to default but I do not understand the cause
You do not have the required permissions to view the files attached to this post.