Core Temp Monitor

A place to discuss topics related to Core Temp
User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Core Temp Monitor

Post by The Coolest »

This forum post will be used as a guide for setting up Core Temp Monitor on your Android or Windows Phone device and configuring Core Temp and the Remote Server plugin on your PC.

Preparing Core Temp
  1. Make sure that you have the latest version of Core Temp installed. (1.0 is the minimum requirement)
  2. Windows 8/2012 Server and later: Install .Net 3.5. Go to 'Turn Windows features on or off' (under Settings in the Start screen), tick .NET Framework 3.5 and click OK.
  3. Download Core Temp Remote Server.
  4. Open the folder where Core Temp is installed, create a 'plugins' folder if it doesn't exist and extract the zip file into a 'CoreTempRemoteServer' folder.
  5. Restart Core Temp, go to Tools, Plug-in manager and enable plug-ins.
  6. Select the plug-in and click Start, the status should change to 'Started'. You should be prompted to unblock Core Temp in Windows' Firewall, you must do it, or else it will block the server and you won't be able to connect.
    *If you wish to see the connection status of the server, or change the default listening port you can click 'Configure' now.
  7. Close the manager.
Linux users
  • This is a Beta version.
  1. Download Linux Core Temp Remote Server.
  2. Make sure that you have Mono installed with 'corlib2.0'. For the WindowGui you also need 'winforms2.0'.
  3. Install lm-sensors
  4. Configure lm-sensors and enable 'coretemp' for Intel processors, 'k8temp' or 'k10temp' for AMD processors and 'via-cputemp' for VIA processors
  5. Run the Gui of your choice and configure it, more information is in the 'readme.txt' file.
Preparing your router
  1. Most of us have a router which connects us to the internet. If you would like to monitor your PC from outside of your network, a port must be forwarded.
    There are plenty of guides on the internet about how to do it, it is usually a pretty straightforward procedure. The default port 'CoreTempRemoteServer' listens on is 5200.
    You must forward a port for every PC you want to monitor, the external port of each must be different. Most routers allow you to specify one external port and forward it to a different port internally.
    This way you can forward port 5200 --> 5200 for your Main PC and 5201 --> 5200 for your Gaming rig. You don't necessarily have to change the server's default listening port to get everything working on several PCs at once.
  2. Some have a static IP address from their ISP, this means that your external IP address never changes, you can simply use that as your 'Hostname' when configuring Core Temp Monitor.
    If your IP address is dynamic, there are plenty of dynamic DNS services out there that will provide you with a URL which redirects to your current IP address. After signing up you will need to configure your router to use this service.
Setting up Core Temp Monitor on your device

Android
  1. First of all you need Core Temp Monitor. You can get it at Google play.
    There are two versions available:
    The Lite version, which is free, includes an advert at the top and is limited to monitoring up to 2 machines.
    ctmlite.png
    The Standard version, which only costs $0.99, doesn't contain any ads and supports an unlimited (in theory) number of machines.
    ctm.png
  2. After you've selected your version and installed it, we need to add a new 'monitor'.
  3. Press the menu button and tap 'Add monitor'.
  4. Give this monitor a name, such as 'Gaming rig', 'Main', etc.
  5. Next you have to provide a host name or an IP address and the port used to connect to your machine.
  6. You can set the monitor to connect automatically when you start the app, and choose the fields that you wish to see in this monitor.
  7. Tap on save and you are done.
Windows Phone (Beta)
  • Please post your feedback and/or bug report for this app.
    There are currently two known bugs, please read this post.
  1. First of all you need Core Temp Monitor. You can get it at the Windows Phone Store.
    The trial version is free. It includes an advert at the bottom and is limited to monitoring up to 2 machines. If you buy the app, the ad and the monitor limit will be removed.
    ctm-wp.png
  2. With the app installed, we need to add a new 'monitor'.
  3. Tap the '+' button in the menu.
  4. Give this monitor a name, such as 'Gaming rig', 'Main', etc.
  5. Next you have to provide a host name or an IP address and the port used to connect to your machine.
  6. You can set the monitor to connect automatically when you start the app, and choose the fields that you wish to see in this monitor.
  7. Tap on save and you are done.
Using Core Temp Monitor
  1. After the app starts, you will see a collapsed list of 'monitors' we added in the previous section.
    Tapping a monitor will expand it and reveal a more detailed information about the system.
  2. Tap and hold a 'monitor' to open a menu, you can copy the status of your PC to the clipboard, configure or remove the monitor.
You do not have the required permissions to view the files attached to this post.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

suprimos
New User
Posts: 2
Joined: Thu Aug 25, 2011 2:41 pm

Re: Core Temp Monitor

Post by suprimos »

hey there...

thanks for the guide...
it worked for me...BUT....i can only use it if my smartphone is also logged in the same w-lan as my pc...

how can i connect to my pc from outside? (smartphone via UMTS etc.)....
i tried to type the ip my pc has on http://www.whatismyip.com/ ... but it wont connect

thx

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Core Temp Monitor

Post by The Coolest »

Read the preparing your router section.
You need to forward a port on your router, and then use your external ip and port in the app.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

suprimos
New User
Posts: 2
Joined: Thu Aug 25, 2011 2:41 pm

Re: Core Temp Monitor

Post by suprimos »

sorry...
i just forgot to mark the portfowarding entry in my router as active :mrgreen:

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Core Temp Monitor

Post by The Coolest »

Great!
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

xraider
New User
Posts: 1
Joined: Sat Aug 27, 2011 6:11 pm

Re: Core Temp Monitor

Post by xraider »

A widget for this app would be awesome! Definitely something i would personally pay for!

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Core Temp Monitor

Post by The Coolest »

I think I looked into it before but it didn't work just right.
I'm new to Android but will give it another look. I'm still trying to decide whether to make an iOS app for this as well or not.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

DJ_Datte
New User
Posts: 1
Joined: Tue Aug 30, 2011 8:46 am

Re: Core Temp Monitor

Post by DJ_Datte »

Heyas!

I am wondering, will there be a PC version of the monitor, it would be *really* sweet if I could monitor my network on a big screen with one line per computer ?

Thank you!

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: Core Temp Monitor

Post by The Coolest »

At this point, I haven't considered a desktop client.
One may be developed and released sometime in the future, though.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

ecce
New User
Posts: 1
Joined: Wed Sep 07, 2011 12:19 pm

Re: Core Temp Monitor

Post by ecce »

CoreTemp crasch right upon start on my win2k8 R2 x64 server if the remote plugin is in the plugins folder.If I remove the plugin the coretemp application starts just fine. Should it work on win2k r2 x64 platforms? If not, which platforms are compatible?

The server I use is just installed from scratch and nothing else is configured on it.

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: Core Temp Monitor

Post by The Coolest »

You have to install .Net 3.5 from the server management or install .Net 4.0
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

Diablo2424
New User
Posts: 2
Joined: Wed Sep 07, 2011 2:31 pm
Location: NJ, USA

Re: Core Temp Monitor

Post by Diablo2424 »

I have opened the port on my firewall successfully, however when I open coretemp I check the log of this plug-in and it says, "Starting Server, listening on 0.0.0.0:5200"

Is this b/c my Windows 7 PC is on a static IP? Why is it not recognizing my IP address? (I am on an IPv4 Address, not IPv6)

Note: When I try to connect on my Android phone, I get a "Connection failed: timeout" error, which makes sense since the plug-in is running the server on IP 0.0.0.0.

Any ideas?

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: Core Temp Monitor

Post by The Coolest »

IP address of 0.0.0.0 stands for Any IP.
The formulation of the text should state something like "Starting Server, accepting connections from Any IP, listening on port 5200".
In other words, what you see in the log is that everything is fine.
- Are you trying to connect from your WiFi or from 3g/4g? If your Android is connecting from your own WiFi, make sure that you use your computer's internal IP address (run ipconfig from the command line).
- In Windows, did you unblock Core Temp in the Windows Firewall (and any other FW you may have installed)?
- If it's 3g/4g, have you forwarded the port in your router?
- if it's 3g/4g, are you using the correct external IP address to connect?
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

Diablo2424
New User
Posts: 2
Joined: Wed Sep 07, 2011 2:31 pm
Location: NJ, USA

Re: Core Temp Monitor

Post by Diablo2424 »

The Coolest wrote:IP address of 0.0.0.0 stands for Any IP.
The formulation of the text should state something like "Starting Server, accepting connections from Any IP, listening on port 5200".
In other words, what you see in the log is that everything is fine.
- Are you trying to connect from your WiFi or from 3g/4g? If your Android is connecting from your own WiFi, make sure that you use your computer's internal IP address (run ipconfig from the command line).
- In Windows, did you unblock Core Temp in the Windows Firewall (and any other FW you may have installed)?
- If it's 3g/4g, have you forwarded the port in your router?
- if it's 3g/4g, are you using the correct external IP address to connect?
Ahh okay, the text does say, word for word, "Starting server, listening on 0.0.0.0:5200" the next line says "Server started".

I am connecting over 3g, using the correct IP Address (also tried through my Dynamic DNS address I have and am currently using for RDP with no issues). I have forwarded port 5200 in my router for both TCP and UDP, and I do not have any other firewall's installed/enabled on my PC or network.

EDIT: Weird, for some reason I switched it to port 5201 and everything started working. Nothing changed except the port number, but magically it started working, lol. Oh well, as long as it's working! :D Thanks! I love the app, the only thing I can think of that would be nice, is if there was a Widget on my Android phone, so I could add the monitoring to one of my desktops and see it whenever I want to. (Should be able to set the updating in interval's, like every 10 mins, 20 mins, 30 mins, 45 mins, 1hr, 1.5 hrs, 2 hrs, 4 hrs or manually) :mrgreen:

Jote
New User
Posts: 2
Joined: Tue Oct 18, 2011 11:53 pm

Re: Core Temp Monitor

Post by Jote »

i think there should be "keep screen awake"-option. It would ease up usage during gaming.

Have you considered making OSD for Core temp? That would be very appreciated feature.

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: Core Temp Monitor

Post by The Coolest »

In the latest version of the app, there is such an option. Download it and take a look :)
An OSD is close to impossible to make. Several people (besides guys like Fraps) tried and it wasn't very successful.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

Jote
New User
Posts: 2
Joined: Tue Oct 18, 2011 11:53 pm

Re: Core Temp Monitor

Post by Jote »

DX11 overlay is "intresting", so i've heard. Fraps and Rivatuner/Afterburner has one but are closed source. Guys working on Mumble are more or less close to solution.
https://github.com/mumble-voip/mumble/pull/28
http://sourceforge.net/apps/phpbb/mumbl ... ?f=5&t=549
http://sourceforge.net/apps/phpbb/mumbl ... ?f=4&t=523

I don't know how open source fits to Core Temp (propably doesn't).

I created nice offtopic....

TekneeQ
New User
Posts: 1
Joined: Thu Jan 19, 2012 12:36 am

Re: Core Temp Monitor

Post by TekneeQ »

Hi, thanks for the great app, I just have one problem. I am trying to run 2 pc's on the lite version, but one of them won't show up. I've made sure to open ports 5200 for one and 5201 for the other, but for some reason it the second one won't show up. Any ideas?

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: Core Temp Monitor

Post by The Coolest »

What do you mean won't show up?
It doesn't connect or what? Also did you configure the server to listen on the 5201 port instead of 5200? Or you can also forward external port 5201to 5200 internal in your router instead of changing the plugins settings.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

jacobsol
New User
Posts: 1
Joined: Thu Jan 19, 2012 6:18 pm

Re: Core Temp Monitor

Post by jacobsol »

TekneeQ wrote:Hi, thanks for the great app, I just have one problem. I am trying to run 2 pc's on the lite version, but one of them won't show up. I've made sure to open ports 5200 for one and 5201 for the other, but for some reason it the second one won't show up. Any ideas?
I've tried the same thing, but for 3 pc's. It works very well for me, although a lot of tweaking had to be done.

sonialondon
New User
Posts: 1
Joined: Fri Jan 20, 2012 9:44 am
Contact:

Re: Core Temp Monitor

Post by sonialondon »

wow, thanks a lot for the wonderful software. I'm struggling with the same problem. I'm worried about my Notebook as it is burning. Wish It'll be helpful for me.

natsuto
New User
Posts: 2
Joined: Mon Mar 05, 2012 8:16 am

Re: Core Temp Monitor

Post by natsuto »

I would like to 2 on a PC running the Lite version, but one of them will not appear. I have to open a 5201 port 5200 for other.
Canon CLI-8

Phoenixlee
New User
Posts: 1
Joined: Fri Mar 16, 2012 5:59 am
Contact:

Re: Core Temp Monitor

Post by Phoenixlee »

Thanks for that, it's much appreciated!

viktorz
New User
Posts: 1
Joined: Fri Mar 23, 2012 7:29 am

Re: Core Temp Monitor

Post by viktorz »

Interesting core temp on freebsd ))
Last edited by viktorz on Fri Sep 21, 2018 11:28 am, edited 5 times in total.

zhenghan1019
New User
Posts: 1
Joined: Fri Mar 30, 2012 6:17 am

Re: Core Temp Monitor

Post by zhenghan1019 »

Thank you for sharing!
:lol:

Post Reply

Return to “Discussion”