Minimizing CTGrapher

User feature requests
Planned features for Core Temp
Post Reply
BubiSparks
Registered User
Registered User
Posts: 3
Joined: Sat Mar 19, 2011 7:41 pm

Minimizing CTGrapher

Post by BubiSparks »

I run coretemp at startup and would really like to use the CTGrapher plugin at startup also. Problem is, when the plugin is enabled the graph launches maximized and you have to mimimize manually it at every boot and then in sits in the task bar. Can we have the option to have the CTGrapher plugin minimize to tray at launch? That way one could just click the icon when the graph is required.

It could be an option in the ini file or a checkbox under general settings or just default behaviour...

Other than this slight issue, Core Temp is great and I've been using it for some time!

Thanks A lot!!

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: Minimizing CTGrapher

Post by The Coolest »

Hi

CTGrapher is not in active development anymore.
So I can't give any promises, but I will consider it.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

BubiSparks
Registered User
Registered User
Posts: 3
Joined: Sat Mar 19, 2011 7:41 pm

Re: Minimizing CTGrapher

Post by BubiSparks »

Thanks for the prompt reply!!!

I'd really appreciate you looking into this as I'm sure others would use this feature also. I was surprised this hadn't come up before as I searched extensively for other threads on this.

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: Minimizing CTGrapher

Post by The Coolest »

Plugin version 1.2 will have an option to enable/disable a system tray icon. Based on whether the icon is shown it will enable you to minimize the window to tray.
It will also enable a minimize on start.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

BubiSparks
Registered User
Registered User
Posts: 3
Joined: Sat Mar 19, 2011 7:41 pm

Re: Minimizing CTGrapher

Post by BubiSparks »

Dude, you rock. Your userneame is entirely appropriate!!!!!!!!!

spook30
New User
Posts: 1
Joined: Fri Dec 16, 2011 4:13 am

Re: Minimizing CTGrapher

Post by spook30 »

has someting been in dev. for ver 1.0 yet? completely love the graph and want it back! Core temp is a sweet program!

qba_dx
New User
Posts: 1
Joined: Wed Feb 15, 2012 2:05 am

Re: Minimizing CTGrapher

Post by qba_dx »

I have some request regarding graph.

Its really great - especially for checking out what the was happening with temps in the background while you were gaming.

But it seriously lack one feature - some kind of possibility to promptly check a temperature in a certain point of graph. similar to rivatuner - when while you were pointing anywhere on the graph it would display vertical ruler at this point and appropriate temperature near it.


This would be great - ebcause right now - there is a problem with reading temperatures in a history of a graph.

Post Reply

Return to “Development”