hi
i download core temp and start it but my temp is 0 celsius and dont change
why??
:SUsers browsing this forum: No registered users and 1 guest
| |||||
My temp is 0
Moderator: imposter
8 posts
• Page 1 of 1
My temp is 0
What processor do you have? Please upload a screenshot (Tools menu --> screenshot)
Member of our O/C Folding @ Home team
"<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now! Main rig: Core i7 2600K 3.4GHz @ 4.5GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / SSD: Crucial M4 128GB (+ HDDs) / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 4GBXL RipJaws X - 16GB total / PSU: Seasonic S12II 620W. Secondary rig: Core i3 540 3.06GHz @ Stock / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 2x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 4GB total / PSU: FSP ATX350-PNR 350W. Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
My only suggestion would be to try the new beta and see if it solves the problem (please let me know).
Beta: http://www.alcpu.com/forums/viewtopic.php?t=571 If it doesn't then it's a DTS problem in your CPU, and it's just deactivated on your processor. Member of our O/C Folding @ Home team
"<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now! Main rig: Core i7 2600K 3.4GHz @ 4.5GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / SSD: Crucial M4 128GB (+ HDDs) / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 4GBXL RipJaws X - 16GB total / PSU: Seasonic S12II 620W. Secondary rig: Core i3 540 3.06GHz @ Stock / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 2x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 4GB total / PSU: FSP ATX350-PNR 350W. Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
I have same issue with 0.99.4
http://www.flickr.com/photos/19461356@N03/3420908723/
http://www.flickr.com/photos/19461356@N03/3420908603/ The first is a screenshot of version 0.99.0. It has always read 49C, but I just started using it, so I assume it will change under load. The second is a screenshot of version 0.99.4. It has always read 0C with a ?. Not sure why. Just started using it today as well. Any insight? Based on what I have seen thus far.......
0.99.0 reads -49C, not 49C. The processor's DTS is not working.
0.99.4 uses a different way to calculate and display the temperature. "?" means the value reported temp could not be validated, and is assumed to be incorrect. Member of our O/C Folding @ Home team
"<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now! Main rig: Core i7 2600K 3.4GHz @ 4.5GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / SSD: Crucial M4 128GB (+ HDDs) / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 4GBXL RipJaws X - 16GB total / PSU: Seasonic S12II 620W. Secondary rig: Core i3 540 3.06GHz @ Stock / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 2x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 4GB total / PSU: FSP ATX350-PNR 350W. Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
Next release may fix this issue, so be prepared to test it out soon
 Member of our O/C Folding @ Home team
"<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now! Main rig: Core i7 2600K 3.4GHz @ 4.5GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / SSD: Crucial M4 128GB (+ HDDs) / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 4GBXL RipJaws X - 16GB total / PSU: Seasonic S12II 620W. Secondary rig: Core i3 540 3.06GHz @ Stock / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 2x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 4GB total / PSU: FSP ATX350-PNR 350W. Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
| ||
8 posts
• Page 1 of 1
Who is online |
||