Adding High/Low temperature readings

Updates on developement of new features and user input/requests

Moderator: imposter

Post Reply
User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Adding High/Low temperature readings

Post by The Coolest »

Been working on the layout a little bit. Adding the very much requested Low/High temperature readings:
Image

Also split out the menu at the top; Settings, systray setup and always on top is in options and the rest is in tools.

Any thoughts?
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

CoreTemp-User115
Registered User
Registered User
Posts: 4
Joined: Thu Jan 01, 1970 12:00 am

Post by CoreTemp-User115 »

current version for Vx64 is 99.4 temps read 20ish degrees higher(unadjusted, seen feedback of them being to lower before offset applied) then Speenfan and HWmonitor(PCWizard) and one other one i uninstalled a couple weeks ago. Also Core #'s are opposite, no big deal really, am satisfied getting core temps.

how about a mini OSD similar to PCWizard when that is minimized perma-set to be on top of all windows tho, even if its just the 2 temps - like in system tray now. Also, would like to see ambient/case temp when in window mode or some other reference temp

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Post by The Coolest »

This is a Beta bug-fix release. Please report if you find any problems or have any suggestions please let me know so they can be fixed/implemented before the final release.

Version 0.99.4 (Build 75) - 27rd January, 2009

- Add: Show high/low temperatures. (Press F6 or the Tools menu to reset values)
- Add: On/Off switch for G15 applet in Tools menu.

- Fix: Settings window would open centered, and sometimes out of the desktop area.
- Fix: System tray icon very small in Windows 2000/XP/2003.
- Fix: AMD Athlon X2 4x50e series detected as 3x50e.
- Fix: Add support for Mobile Athlon 64 X2 TK-xx series and Turion 64 MK-xx series.
- Fix: Workaround added for when Core Temp fails to find supported CPUs on Phenom based systems.

- Change: Reorganized menu.
- Change: Only detect ES status for Core 2 series. Core i7 and Atom detection was incorrect.
- Change: TjMax for mobile Atom processors changed to 90C.
- Change: "Lion" codename for AMD Turion was changed to "Griffin".

32bit
64bit

Skibo1219:
I'll add the OSD to the to do list.
Regarding the higher temps, if you have a 65nm Athlon64 based system then AMD issued a fix for the bad reading most/all of these CPUs were reporting. (The fix is a 21C offset).
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

CoreTemp-User118
Registered User
Registered User
Posts: 10
Joined: Thu Jan 01, 1970 12:00 am

Still problems with AMD MK-36

Post by CoreTemp-User118 »

The latest 0.99.4.76 still cannot properly detect my Turion 64 mk36. Now it is shown as mk-22. with 0.99.4.65 it was AMD Processor 2200+. My other turion x2 tl-60 still has the frequncy problem but it is shown correctly.

Actually the tl-60 has the cool'n'quiet and the frequancy problem occurs. the mk36 doesn't has this cool'n'quiet (something with bios) and the frequncy is detected properly. Maybe tis can help.

my bug report:
http://alcpu.com/forums/viewtopic.php?t=531

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Post by The Coolest »

Oops, as always, missed a line of code.
The next public build release will include a fix for this :)

Regarding the frequency. I'm going to rework the whole system of frequency detection and try to read the HTT/FSB speed instead of basing it on an out dated algorithm that's pretty much broken.

How do you like the new addition of High/Low values?
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

CoreTemp-User118
Registered User
Registered User
Posts: 10
Joined: Thu Jan 01, 1970 12:00 am

Post by CoreTemp-User118 »

The Coolest wrote:Oops, as always, missed a line of code.
The next public build release will include a fix for this :)

Regarding the frequency. I'm going to rework the whole system of frequency detection and try to read the HTT/FSB speed instead of basing it on an out dated algorithm that's pretty much broken.

How do you like the new addition of High/Low values?
I've not seen the code for the frequency detection but can't you just use the code from 0.99.3? I've seen other people (here in the forum) that are experiencing the same problems with the frequency. And they all say that 0.99.3 worked fine. It'll be great to make a new inplementation for it but maybe for the time being you have to revert to the code from 0.99.3. It's a workable solution untill you write the new one.

High/Low values:
Nice idea, but I don't know if it is consistent between program restarts. Every time I restart the program I've got new values which means that the lowest value (after restart) will be calculated from the currect temperature. So it won't be exactly the lowest one. If you put it in a file you have to manage to reset it in time periods like days or weeks. So maybe the lowest value won't have any significant meaning. Maybe you just have to leave the highest one (my personal opinion).

By the way: the current temp is shown in kind of brown colour when it is about 60C. Why don't you leave the colour to just black or let the user adjust it?

Some ideas about the layout:
It consists of 2 types of data:
1. One that changes like woltage, frequency, temp.
2. One that is a constant (chipset, id, etc)
Why don't you put the significant one on the left side and left the less important on the right side? I don't think that people are interested in seeing what kind of chipset they are using and the cpuid. This info should be there but it's not that important and maybe you can separate it in one place in the programe. Thie is of course my personal opinion.

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Post by The Coolest »

The frequency problem will be fixed in a future release.

High/Low values are of course collected from program startup for monitoring highs and lows in a certain period of time. I see no point in saving that information in a file for future runs...

The color changes when the temperature goes above a certain preset value in the processor, it alerts you that the processor is running warm and red means it's running hot.
You can adjust the colors from the ini file (if you haven't deleted the ini from 0.99.3, you'll have to do so for Core Temp to create a new file with all the needed entries).

The values are formatted in a BGR hexadecimal format when 0xFF000000 tells Core Temp to use the default system colors.

Regarding the layout, I'm planning to implement a "mini-mode", so whenever you don't want to see all that extra information it can be hidden.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

CoreTemp-User115
Registered User
Registered User
Posts: 4
Joined: Thu Jan 01, 1970 12:00 am

Post by CoreTemp-User115 »

The Coolest wrote:This is a Beta bug-fix release. Please report if you find any problems or have any suggestions please let me know so they can be fixed/implemented before the final release.

Version 0.99.4 (Build 75) - 27rd January, 2009

- Add: Show high/low temperatures. (Press F6 or the Tools menu to reset values)
- Add: On/Off switch for G15 applet in Tools menu.

- Fix: Settings window would open centered, and sometimes out of the desktop area.
- Fix: System tray icon very small in Windows 2000/XP/2003.
- Fix: AMD Athlon X2 4x50e series detected as 3x50e.
- Fix: Add support for Mobile Athlon 64 X2 TK-xx series and Turion 64 MK-xx series.
- Fix: Workaround added for when Core Temp fails to find supported CPUs on Phenom based systems.

- Change: Reorganized menu.
- Change: Only detect ES status for Core 2 series. Core i7 and Atom detection was incorrect.
- Change: TjMax for mobile Atom processors changed to 90C.
- Change: "Lion" codename for AMD Turion was changed to "Griffin".

32bit
64bit

Skibo1219:
I'll add the OSD to the to do list.
Regarding the higher temps, if you have a 65nm Athlon64 based system then AMD issued a fix for the bad reading most/all of these CPUs were reporting. (The fix is a 21C offset).
Image

Hmmm, I'll look for that, thanks.

BTW, I agree with pepe on the low temp not being needed on the other hand if/when you get the 64 bit graph done it would be nice to see it there.with a timestamp, maybe.

GigaByte
Registered User
Registered User
Posts: 46
Joined: Fri Dec 07, 2007 7:31 pm

Post by GigaByte »

Nice progress with CoreTemp over the last year or so (since the last time I posted here), and I really like the min/max temp readouts. Keep up the good work.

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Post by The Coolest »

Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

Rhialto
Registered User
Registered User
Posts: 13
Joined: Sat Mar 24, 2007 12:13 pm

Post by Rhialto »

The Coolest wrote:How do you like the new addition of High/Low values?
I would drop the low and replace it with time the highest was obtained.

I think we all want to avoid critical high temp (I don't care about the lowest I can get, it's when I power the cmoputer anyway).

With the timestamp, it could help spot what program could have been running at that time, etc.

My 2 cents

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Post by The Coolest »

If you really want to see a specific time, you can simply turn on logging and see what time it was when the highest temperature was reached.
Regarding the grapher, I'll see what can be done.
But I'm really short on time, so I'm not sure when I'll be able to work on it.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

Post Reply

Return to “Core Temp - Development”