Indicate with the T7600 too low?

Report any bugs you have with the program, so they can be fixed.

Moderator: imposter

Post Reply
CoreTemp-User036
New User
Posts: 2
Joined: Thu Jan 01, 1970 12:00 am

Indicate with the T7600 too low?

Post by CoreTemp-User036 »

Hi! 8)

Sorry for my bad english. :roll:

I use the current version of core temp 0.99.3 on the Main board AOpen i975Xa-YDG of AOpen. Whereupon a mobile Intel core puts 2 duo T7600 (Merom). In the no-load operation core temp indicates a temperature of approximately 30-35 degrees.

For some days I use the program BOINC for the project Seti@home. Thus the processor runs on full achievement. Strange to say however the processor temperature does not increase, but it is reduced. :eek:
Looks current in such a way:
Core#0: 15°C to Tjunction max remaining / 100% load
Core#1: 23°C to Tjunction max remaining / 100% load
I am confused. :)

Bye

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Post by The Coolest »

What you see there is the distance to TjMax. Meaning how close your processor is to the maximum "allowed" temperature.
Your temperature is still safe, considering this is a mobile processor and these are designed to cope with the heat, but if possible, I would consider to upgrade the cooling.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

CoreTemp-User036
New User
Posts: 2
Joined: Thu Jan 01, 1970 12:00 am

Post by CoreTemp-User036 »

Good mornings! 8)

Now I see it also in the attitudes. There the problem probably sat before the screen. :oops:

Bye

Post Reply

Return to “Core Temp - Bug reports”