Core temps missing on Ryzen on system startup + freezing

[MDKpt]

also bare in mind every reboot for me have to close and open becouse it only shows the ccd´s



after closing and open again every thing is normal



also like the beta of 1.19 it sometimes says program not responding

[The Coolest]

Try this test build, I think it should fix the freezing part.
https://www.alcpu.com/CoreTemp/CoreTemp-1-20-1-x64.zip

Regarding the no core temps after a reboot, I could not reproduce this on my Ryzen systems and need some help debugging it.
First, disable Core Temp's start with Windows option, then shut down and restart your computer.
Start "Debug View" as admin with everything under the "Capture" menu checked.
Https://learn.microsoft.com/en-us/sysin ... /debugview
Start Core Temp and make sure that the issue is reproduced, in Debug View you should see some new output. Then you can close Core Temp, restart it and see that it starts normally. Then save the log and close Debug View.
Post or email the Debug View log file to me.

[limitz]

I am experiencing the same not starting with windows issue. However, I do not have freezing

[limitz]

Try this test build, I think it should fix the freezing part.
https://www.alcpu.com/CoreTemp/CoreTemp-1-20-1-x64.zip

Regarding the no core temps after a reboot, I could not reproduce this on my Ryzen systems and need some help debugging it.
First, disable Core Temp's start with Windows option, then shut down and restart your computer.
Start "Debug View" as admin with everything under the "Capture" menu checked.
Https://learn.microsoft.com/en-us/sysin ... /debugview
Start Core Temp and make sure that the issue is reproduced, in Debug View you should see some new output. Then you can close Core Temp, restart it and see that it starts normally. Then save the log and close Debug View.
Post or email the Debug View log file to me.

I have sent the log to your Admin e-mail. Hope it helps.