Crashes without event messages or errors

A place to discuss topics related to Core Temp
Post Reply
Korishan
Registered User
Registered User
Posts: 7
Joined: Mon Jul 10, 2017 3:28 pm

Crashes without event messages or errors

Post by Korishan »

I have the latest version (1.9) of CoreTemp. For some odd reason, it will just crash/quit randomly. I haven't been able to determine the time frame of when it does quit. I usually keep it in the tray and I've noticed that sometimes when I look down there, several of the icons are gone (I have ram, temp, cpu, load) and when I hover the mouse over what ever is left, it disappears as well. I then have to re-launch CoreTemp.
Any ideas on how to find out what is causing the quitting?


System Specs:
AMD FX 6100
ASRock 970A-G/3.1
ADATA XPG V2 16GB (2 x 8GB) DDR3 2400
Gigabyte Radeon R7 360
Samsung PM951 MZFLV128HCGR MZ-FLV1280 128GB 2280 M.2 NVME SSD

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: Crashes without event messages or errors

Post by The Coolest »

You can try looking in the Windows Event Viewer. It may hold the info about the crash.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

Korishan
Registered User
Registered User
Posts: 7
Joined: Mon Jul 10, 2017 3:28 pm

Re: Crashes without event messages or errors

Post by Korishan »

I already looked at those logs. Nothing there. Sorry, I thought I included that in my OP.

However, after leaving the window portion of CT open, it hasn't crashed yet. So it's been 4 hours and it's been fine. I haven't changed anything on the computer other than leave the main window open.

Korishan
Registered User
Registered User
Posts: 7
Joined: Mon Jul 10, 2017 3:28 pm

Re: Crashes without event messages or errors

Post by Korishan »

Ok, got an update. CT just crashed and this time I got the windows debug option. I guess having the window open causes it to crash loudly, and the tray is crashes silently :?:

However, since I only have Visual Studio installed, that's the program it wants to debug in. After opening up VS, I have to relaunch CT through VS to do the monitoring. I will let it run and see how long it will run monitoring CT.
So, last time it ran about 4.5 hours. Hopefully it won't last that long this time. But, I do have outside stuff to do. It's only 3:10pm atm.

I was able to get an Event this time. Hopefully this will help:

Faulting application name: Core Temp.exe, version: 1.9.0.0, time stamp: 0x59615b5e
Faulting module name: Core Temp.exe, version: 1.9.0.0, time stamp: 0x59615b5e
Exception code: 0xc0000417
Fault offset: 0x000000000006ede4
Faulting process id: 0x2074
Faulting application start time: 0x01d2f9900afd715c
Faulting application path: D:\Program Files\Core Temp\Core Temp.exe
Faulting module path: D:\Program Files\Core Temp\Core Temp.exe
Report Id: 32b53fbb-eb20-43c1-8863-f50fc29583f0
Faulting package full name:
Faulting package-relative application ID:

Korishan
Registered User
Registered User
Posts: 7
Joined: Mon Jul 10, 2017 3:28 pm

Re: Crashes without event messages or errors

Post by Korishan »

Ok, it finally crashed while in Visual Studio running.

onecore\com\combase\class\compobj.cxx(3881)\combase.dll!00007FFB5806240F: (caller: 00007FF6B9027049) ReturnHr(1) tid(13e8) 80070057 The parameter is incorrect.
onecore\com\combase\class\compobj.cxx(3881)\combase.dll!00007FFB5806240F: (caller: 00007FF6B9027049) ReturnHr(2) tid(13e8) 80070057 The parameter is incorrect.


That's pretty much everything I could extrapolate.

Hope that helps out.


Ohhh, btw, I'm running Windows 10 Pro Version 10.0.15063 Build 15063

Korishan
Registered User
Registered User
Posts: 7
Joined: Mon Jul 10, 2017 3:28 pm

Re: Crashes without event messages or errors

Post by Korishan »

I have replied several pieces of information that were "awaiting approval". Why have they not been approved and posted??

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: Crashes without event messages or errors

Post by The Coolest »

Sorry for the late reply.
I have not been able to track down the issue yet.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

Naki
Registered User
Registered User
Posts: 213
Joined: Sun Oct 14, 2012 2:13 pm
Location: Eastern Europe
Contact:

Re: Crashes without event messages or errors

Post by Naki »

Korishan - you might want to report OS versions properly going forward. Please note Windows 10 Creators update is the build you mention, but not the version at all!
Version should be 1703, which has nothing to do with "Version 10.0.15063" you mention.
You can see all of this via "winver" command.

Korishan
Registered User
Registered User
Posts: 7
Joined: Mon Jul 10, 2017 3:28 pm

Re: Crashes without event messages or errors

Post by Korishan »

Still having issues.

I have even changed from F to C measurements. That didn't make a difference. When the program is in the tray, I get no error messages at all. Only when the program is in window mode will I get an error; both a message box and error messages in event viewer.

Naki: I had gotten the OS version from a system information program. I can't remember what one I used now, I think I uninstalled it. But, you are correct, under winver, it does show 1703.

Kori

Korishan
Registered User
Registered User
Posts: 7
Joined: Mon Jul 10, 2017 3:28 pm

Re: Crashes without event messages or errors

Post by Korishan »

Giving an update.

Ok, so I've had my system running now for almost 24hrs, and CoreTemp is still running.

The big change, a new motherboard. It's the only thing changed. I went from a ASROCK 970A-G/3.1 to an ASUS 970 Pro Gaming/Aura. I'm not sure what the difference is between the boards, but something is different. CoreTemp hasn't crashed. The Asrock I felt was running my system wierd. I couldn't do any kind of proper Overclocking, and I was getting some odd readings. The Asus runs smooth.

So what it's worth, that's the problem, the motherboard.

Kori

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: Crashes without event messages or errors

Post by The Coolest »

Thanks for the update.
That's strange indeed, maybe it had an issue, which also caused Core Temp to crash due to one of these weird readings.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

Post Reply

Return to “Discussion”