Core Temp 1.4.1 showing wrong multiplier and frequency

Post about bugs you find in Core Temp so they can be addressed and fixed efficiently
Post Reply
Jacob Klein
Registered User
Registered User
Posts: 27
Joined: Mon Jul 04, 2016 10:33 pm

Core Temp 1.4.1 showing wrong multiplier and frequency

Post by Jacob Klein »

Core Temp 1.4.1 showing wrong multiplier and frequency

I have an Intel i7-965 Extreme Edition CPU, overclocked at a 28 multiplier on all 4 cores.
Model: Intel Core i7 (Bloomfield)
Platform: LGA 1366 (Socket B)
Revision: C0/C1

Core Temp 1.4 correctly shows my "28" multiplier, and my "133.64 x 28.0 = 3741.89MHz" frequency.
Core Temp 1.4.1 incorrectly shows a "25" multiplier, and a "133.64 x 25.0 = 3340.95MHz" frequency.

Could you please either fix this or tell me what's wrong?

This is on Windows 10 x64 Insider Build 14942, if that matters.

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: Core Temp 1.4.1 showing wrong multiplier and frequency

Post by The Coolest »

Please post a register dump from Core Temp (Tools menu) and I'll take a look what could be wrong.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

Jacob Klein
Registered User
Registered User
Posts: 27
Joined: Mon Jul 04, 2016 10:33 pm

Re: Core Temp 1.4.1 showing wrong multiplier and frequency

Post by Jacob Klein »

Here it is, attached. It was taken while under full load, at a 28 multiplier according to CPU-Z.
You do not have the required permissions to view the files attached to this post.

Jacob Klein
Registered User
Registered User
Posts: 27
Joined: Mon Jul 04, 2016 10:33 pm

Re: Core Temp 1.4.1 showing wrong multiplier and frequency

Post by Jacob Klein »

I also have an i5 520M laptop CPU ... where Core Temp is saying the multiplier is 19, when really I believe it to be 20.

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: Core Temp 1.4.1 showing wrong multiplier and frequency

Post by The Coolest »

Right, it's a bug. I found it, it'll be fixed in the next release.
Thanks for the report.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

Jacob Klein
Registered User
Registered User
Posts: 27
Joined: Mon Jul 04, 2016 10:33 pm

Re: Core Temp 1.4.1 showing wrong multiplier and frequency

Post by Jacob Klein »

Excellent. Thank you, and keep up the great work. I use Core Temp to monitor loads/frequency/temps on my 4 PCs that do BOINC work :)

Jacob Klein
Registered User
Registered User
Posts: 27
Joined: Mon Jul 04, 2016 10:33 pm

Re: Core Temp 1.4.1 showing wrong multiplier and frequency

Post by Jacob Klein »

The Coolest wrote:Right, it's a bug. I found it, it'll be fixed in the next release.
Thanks for the report.
Any idea when we might see the next release?

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: Core Temp 1.4.1 showing wrong multiplier and frequency

Post by The Coolest »

Probably around the weekend.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

anyidyoulike
Registered User
Registered User
Posts: 3
Joined: Mon Nov 07, 2016 6:25 pm

Re: Core Temp 1.4.1 showing wrong multiplier and frequency

Post by anyidyoulike »

I own Acer E15, E5-575G-5162, i5 7200u Kaby Lake and I believe that the cpu frequency it is not shown correctly and the core temp application it is not recognizing the cpu model. Can you check please the core temp dump file?
You do not have the required permissions to view the files attached to this post.

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: Core Temp 1.4.1 showing wrong multiplier and frequency

Post by The Coolest »

@anyidyoulike
Thanks! Just confirmed that Core Temp will work well on this CPU. The Bus speed is incorrect because of to the same reason it was broken on Skylake at first as well.
These chips implement a different way of accessing the bus clock frequency, and support in Core Temp must be 'manually' added so that there are no potential stability issues with future systems.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

anyidyoulike
Registered User
Registered User
Posts: 3
Joined: Mon Nov 07, 2016 6:25 pm

Re: Core Temp 1.4.1 showing wrong multiplier and frequency

Post by anyidyoulike »

Thanks for your reply. In conclusion, this issue it will be fixed on the future update or it can be fixed manualy on the local machine?

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: Core Temp 1.4.1 showing wrong multiplier and frequency

Post by The Coolest »

A fix will be included in the upcoming release.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

anyidyoulike
Registered User
Registered User
Posts: 3
Joined: Mon Nov 07, 2016 6:25 pm

Re: Core Temp 1.4.1 showing wrong multiplier and frequency

Post by anyidyoulike »

Excellent. Thank you!

Jacob Klein
Registered User
Registered User
Posts: 27
Joined: Mon Jul 04, 2016 10:33 pm

Re: Core Temp 1.4.1 showing wrong multiplier and frequency

Post by Jacob Klein »

I have a couple questions regarding the multipliers:

CPU-Z has a way to choose Tools -> Clocks ... to see the instantaneous multipliers for each core.
Core Temp just shows a single multiplier, and sometimes shows values like "19.5", when a half a multiplier doesn't even make sense for my CPUs.

1) What exactly is Core Temp showing? Is it some sort of "average multiplier" across all cores, across a certain time frame (what time frame)?
2) Do you have any intention of ever showing instantaneous multipliers in the Core Temp UI, like CPU-Z can? I see it in Tools -> System Information, but it'd be much more useful if shown on the main screen somewhere.

Regards,
Jacob

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: Core Temp 1.4.1 showing wrong multiplier and frequency

Post by The Coolest »

Sorry, I missed your post Jacob.
I don't have plans for that right now. Core Temp has always displayed the highest clock speed the processor is running at.
I'll add that to the todo list, though, for future consideration.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

Jacob Klein
Registered User
Registered User
Posts: 27
Joined: Mon Jul 04, 2016 10:33 pm

Re: Core Temp 1.4.1 showing wrong multiplier and frequency

Post by Jacob Klein »

Thank you for considering it :)
Have a wonderful weekend!

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: Core Temp 1.4.1 showing wrong multiplier and frequency

Post by The Coolest »

Just wanted to publicly say that this problem will be fixed in the next release.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

Jacob Klein
Registered User
Registered User
Posts: 27
Joined: Mon Jul 04, 2016 10:33 pm

Re: Core Temp 1.4.1 showing wrong multiplier and frequency

Post by Jacob Klein »

KUDOS!

Looking forward to the feature :)

Post Reply

Return to “Bug reports”