Manchester Athlon62 X2 3800+ disabled core

AMD CPU related discussions

Moderators: The Coolest, imposter

Post Reply
Haradrim
New User
Posts: 1
Joined: Mon Mar 19, 2007 10:33 pm

Manchester Athlon62 X2 3800+ disabled core

Post by Haradrim »

Have an Athlon 64 x2 3800 dual core on Asus A8N32 SLI deluxe MB. several core sensor programs have only reported core0 and CPU-Z reports 2 cores, but 1 disabled. have WinXP SP2 Home, current AMD CPU drivers, Nvidia motherboard drivers, etc. Installed from original XP disc and used Microsoft Update to download SP1 then SP2. Why is Core1 disabled? Did something not click on after the updates or what?

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Post by The Coolest »

First question would be is it disabled in the BIOS?
Does your current BIOS version even support dual core processors properly?

Then I would look in Device Manager under "Computer" and see if you have a Uniprocessor or Multiprocessor ACPI? If you have Uni, try to uninstall it and reboot and see if it detects your rig as Multi APCI. If not, try to add it manually by "Update driver" option.

If you checked the BIOS and tried the above, then just reinstall windows.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

synaptix
Registered User
Registered User
Posts: 4
Joined: Wed Apr 25, 2007 2:08 pm
Contact:

Post by synaptix »

If you are installing an original version of XP (read: not SP2), then you will have just a little bit more trouble getting your dual-core system up and running than the rest of us. The problem is that dual-core CPU's were not around when XP was first released, and so they had to add support for this type of hardware with SP2.

There used to be a great guide on upgrading from single to dual-core AMD CPUs on the AMD Processor Support Forums, but since they recently switched from the Invision Power Board to FuseTalk, a lot of the good guides and such have been lost. You can check out the guide I have written HERE if you wish, that gives the option to either perform a clean install or a simple upgrade that should take care of everything.

Hope all this helps.
Having problems with your AMD computer? Find varianiv in the AMD Processor Support Forum
Image

Image

Post Reply

Return to “AMD CPUs”