How Do I remove CoreTemp?

A place to discuss anything related to Core Temp and temperature reading in general
Post Reply
CoreTemp-User018
Registered User
Registered User
Posts: 6
Joined: Thu Jan 01, 1970 12:00 am

How Do I remove CoreTemp?

Post by CoreTemp-User018 »

How do I remove CoreTemp from my system...it's not listed in the Add/Remove programs and I can find no information on how to remove it.
Thanks!
Mike

System Specs: Vista32 - XFX680i LT - Q6600 2.4@2.93GHz - 4GB Mushkin PC2 8500
Last edited by CoreTemp-User018 on Sat Aug 16, 2008 3:23 am, edited 4 times in total.

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Post by The Coolest »

Just delete it?
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

CoreTemp-User018
Registered User
Registered User
Posts: 6
Joined: Thu Jan 01, 1970 12:00 am

Post by CoreTemp-User018 »

Thank you!

Actually I may keep it now. I thought it was not working on my system as I was getting temps of 63°C at idle, but once I unchecked "Show Delta to Tjunction max temp" in "Settings" (not sure what that is) readings were normal...well I guess they're normal. Is 36°C at idle normal?
Thanks!
Mike

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Post by The Coolest »

Delta to TjMax shows you the temperature delta in °C from the maximum thermal spec.
So 63C idle is a very high temp.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

CoreTemp-User018
Registered User
Registered User
Posts: 6
Joined: Thu Jan 01, 1970 12:00 am

Post by CoreTemp-User018 »

What is an acceptable Delta to Tjunction max temp and how can I achieve it?
Thanks!
Mike

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Post by The Coolest »

You need to make sure your CPU cooler is working properly, clean of dust. Maybe a bad mount or have you overclocked/overvolted too high?
If you're overclocking I hope that you're not using the stock cooler...
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

CoreTemp-User018
Registered User
Registered User
Posts: 6
Joined: Thu Jan 01, 1970 12:00 am

Post by CoreTemp-User018 »

I have overclocked and it is the stock cooler but did not change voltage...I'll set defaults and upgrade cooler. This is my first attempt at OC'ing and I thought everything was OK going by the core temp average reading of 37°C. Any recommendations for a cooler? The XIGMATEK HDT-S1283 has received good reviews...comments?
Thanks!
Mike

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Post by The Coolest »

I'm no expert in cooling, but the stock cooler will give you bad results.
When you're using the Delta to Tj Max option in Core Temp, the higher the temp (it's not actual temperature, it's the delta to maximum temp) the better.

I personally have a Tuniq Tower-120. It's great, very quiet and cools very well.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

Post Reply

Return to “Core Temp - Discussion”