Open Hardware Monitor - OPEN SOURCE

Off topic discussions or chats
Post Reply
hathor
Registered User
Registered User
Posts: 31
Joined: Fri Aug 25, 2006 7:02 am
Location: Berlin, Germany

Open Hardware Monitor - OPEN SOURCE

Post by hathor »

Open Hardware Monitor

The Open Hardware Monitor is a free open source application that monitors temperature sensors, fan speeds, voltages, load and clock speeds of a computer. It supports most hardware monitoring chips found on todays mainboards like the ITE, Winbond and Fintek families. The CPU temperature can be monitored by reading the core temperature sensors of Intel and AMD processors. The sensors of ATI and Nvidia video cards as well as SMART hard drive temperature can be displayed. The Open Hardware Monitor runs on 32-bit and 64-bit Microsoft Windows and any x86 based Linux operating systems without installation.

The Open Hardware Monitor runs on Microsoft Windows with the .NET Framework version 2.0 and above. On Linux systems the Open Hardware Monitor requires Mono.

To install just unpack the zip archive and run OpenHardwareMonitor.exe with Administrator rights. Without Administrator rights most hardware sensors are not accessible. The application is still in Beta status, so use it at your own risk.

Open Hardware Monitor | CPU Temperature, Fan Speed, Voltages, Clocks and More

C# - Source:
open-hardware-monitor - Revision 280: /
open-hardware-monitor - Project Hosting on Google Code
.
ImageImage
Greetings from BERLIN, GERMANY!
tiu-hathor

Post Reply

Return to “General Discussions”