Suggestion: Change Display Clock Details in Gadget

User feature requests
Planned features for Core Temp
Post Reply
tarunp
Registered User
Registered User
Posts: 6
Joined: Thu Aug 19, 2010 4:43 am

Suggestion: Change Display Clock Details in Gadget

Post by tarunp »

Is it possible to provide an option to show clock details "rounded-off" i.e. without the decimal points in the CoreTemp Gadget ?

My Gadget shows clock details as 399.98 x 9.0

I would rather it showed 400 x 9

Not only would this be easier to read but it would also reduce clutter on the gadget.

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: Suggestion: Change Display Clock Details in Gadget

Post by The Coolest »

Good idea, I will round off the fsb, as it rarely changes, but I'll leave the multiplier as is. Otherwise the clock field may constantly resize itself on half multipliers (ie x6.5), and that could be annoying/distracting.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

tarunp
Registered User
Registered User
Posts: 6
Joined: Thu Aug 19, 2010 4:43 am

Re: Suggestion: Change Display Clock Details in Gadget

Post by tarunp »

Many thanks - look forward to the next version incorporating the change.

tarunp
Registered User
Registered User
Posts: 6
Joined: Thu Aug 19, 2010 4:43 am

Re: Suggestion: Change Display Clock Details in Gadget

Post by tarunp »

While you are rounding off the FSB details, you might also like to consider displaying the clock speed in Ghz instead of Mhz - for example 3.6 Ghz instaed of 3600 Mhz.

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: Suggestion: Change Display Clock Details in Gadget

Post by The Coolest »

Good idea, added that as an option in the Options window.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

tarunp
Registered User
Registered User
Posts: 6
Joined: Thu Aug 19, 2010 4:43 am

Re: Suggestion: Change Display Clock Details in Gadget

Post by tarunp »

I just noticed that you updated the gadget at the Windows Live page incorporating my suggested changes.

Many thanks and I must say i am very impressed by your prompt action.

Just one minor suggestion ; when the clock details are displayed in Ghz, can there be one-space gap between the Clock Speed and the FSB details since that would be even easier to read ? My system displays the following:

Clock: 3.6Ghz(400x9.0)

A one-space gap would read as:

Clock: 3.6Ghz (400x9.0)

In fact, if space permits, 3 more "spaces" could be introduced:

Clock: 3.6 Ghz (400 x 9)

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: Suggestion: Change Display Clock Details in Gadget

Post by The Coolest »

I'll probably add a space between the 'GHz' and the '(' but the others, not so much as I don't want to cut the decimal point in the multiplier and there's not that much free space.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

Post Reply

Return to “Development”