Users browsing this forum: No registered users and 2 guests
| |||||
2 posts
• Page 1 of 1
Incorrect temp read?
I just installed Core Temp on my Acer Aspire 5515, running an Athlon 64 with Win 7 64-bit. I am running the 64-bit Core Temp and the only thing showing correctly is clock speed and load. The temp sensor is reading 21*C (70*F) and isn't reporting any change in temperature. Am I doing something wrong, or is there an issue with my M/B or Core Temp?
Re: Incorrect temp read?
In some cases software's access to the thermal sensors is blocked, either by the BIOS or the sensor is disabled.
In that case, depending on the specific CPU model you will see 0C or 21C. I haven't found a way around this issue. Member of our O/C Folding @ Home team
"<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now! Main rig: Core i7 2600K 3.4GHz @ 4.5GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / SSD: Crucial M4 128GB (+ HDDs) / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 4GBXL RipJaws X - 16GB total / PSU: Seasonic S12II 620W. Secondary rig: Core i3 540 3.06GHz @ Stock / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 2x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 4GB total / PSU: FSP ATX350-PNR 350W. Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
| ||
2 posts
• Page 1 of 1
Who is online |
||