Is there a log of high temp after closing?

A place to discuss topics related to Core Temp
Post Reply
tackmakr
New User
Posts: 2
Joined: Tue Jul 23, 2013 7:31 pm

Is there a log of high temp after closing?

Post by tackmakr »

My computer is randomly rebooting. I don't see anywhere that Core Temp has saved the highest temperature once it closes.
I've never seen the temp above 49 but I've never been looking at it right as it closes so I can't say for sure there wasn't some big temp spike. If there is a log somewhere I need help to find it. :|

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: Is there a log of high temp after closing?

Post by The Coolest »

You can turn on logging. Then Core Temp will create a .csv log file with temperature and load readings in its folder.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

tackmakr
New User
Posts: 2
Joined: Tue Jul 23, 2013 7:31 pm

Re: Is there a log of high temp after closing?

Post by tackmakr »

Thank you, I found it.

Post Reply

Return to “Discussion”