AMD Phenom X6 1055, 0C.

A place to discuss topics related to Core Temp
Post Reply
clgarrett2020
New User
Posts: 1
Joined: Sun Oct 07, 2012 2:08 am

AMD Phenom X6 1055, 0C.

Post by clgarrett2020 »

Hi, I'm not able to get a temperature reading on my AMD 6 core 2.8ghz Processor. This is my first time OC the processor and if i OC it the slightest it wont read a cpu temp. I'm just wondering if there is a fix to this. Also i'm using Corsairs H60 water cooling system if that helps any. Thanks again Chris.

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: AMD Phenom X6 1055, 0C.

Post by The Coolest »

As it was explained in the FAQ, go into the BIOS and make sure that any Core unlocking features are turned OFF.
And in case your BIOS has an ACC (Advanced Clock Calibration) option, make sure that it is disabled as well.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

Post Reply

Return to “Discussion”