Login | Register

My tempetures

A place to discuss topics related to Core Temp
  • Author
    Message

My tempetures

Postby cragger » Mon May 02, 2011 3:38 am

Just wandering if you think my temps are ok i have not use the off set as i don't no how 2nd pic is at idle 1st pic is at full load 100%

Could someone please help me out with this thank you.













Image
Attachments
CoreTemp-Scr1.png
CoreTemp-Scr1.png (54.98 KiB) Viewed 2206 times
CoreTemp-Scr.png
CoreTemp-Scr.png (54.63 KiB) Viewed 2206 times
cragger
Registered User
Registered User
 
Posts: 4
Joined: Mon May 02, 2011 3:10 am

Re: My tempetures

Postby The Coolest » Tue May 03, 2011 7:54 am

You temps look great.
Member of our O/C Folding @ Home team
"<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now!
Main rig:
Core i7 2600K 3.4GHz @ 4.5GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / SSD: Crucial M4 128GB (+ HDDs) / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 4GBXL RipJaws X - 16GB total / PSU: Seasonic S12II 620W.
Secondary rig:
Core i3 540 3.06GHz @ Stock / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 2x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 4GB total / PSU: FSP ATX350-PNR 350W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
User avatar
The Coolest
Site Admin
Site Admin
 
Posts: 2461
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel

Re: My tempetures

Postby cragger » Tue May 03, 2011 10:58 am

Thank you for a quick reply. Now i have figure out how to use the offsets.

Do i set the offset to the highest or lowest temperature or just leave everything as it is.

thank you again cheers.
cragger
Registered User
Registered User
 
Posts: 4
Joined: Mon May 02, 2011 3:10 am

Re: My tempetures

Postby The Coolest » Tue May 03, 2011 11:01 am

You don't have to use the offsets at all, unless you find it necessary.
Member of our O/C Folding @ Home team
"<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now!
Main rig:
Core i7 2600K 3.4GHz @ 4.5GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / SSD: Crucial M4 128GB (+ HDDs) / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 4GBXL RipJaws X - 16GB total / PSU: Seasonic S12II 620W.
Secondary rig:
Core i3 540 3.06GHz @ Stock / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 2x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 4GB total / PSU: FSP ATX350-PNR 350W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
User avatar
The Coolest
Site Admin
Site Admin
 
Posts: 2461
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel

Re: My tempetures

Postby cragger » Tue May 03, 2011 11:23 am

Thanks Coolist for everything i was just abit worried about my #0 core reading higher above most but they seem to all level out at higher load, this is my first overclock from 2.66 to 3.2 with nothing left on auto, alot of google research, with alot of prime 95 testing, 24hrs on small FFTS and 24hrs on blend test no errors and ran memtest for 12hrs no errors. Is it worth running large FFT for 24hrs?


Cheers cragger
cragger
Registered User
Registered User
 
Posts: 4
Joined: Mon May 02, 2011 3:10 am

Re: My tempetures

Postby The Coolest » Tue May 03, 2011 2:12 pm

Usually it's best to let it run for 24 hours, at least.
There are other tools like Linx, which doesn't take as long as Prime95 to detect instability, but I suggest you read up on it before use.
Member of our O/C Folding @ Home team
"<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now!
Main rig:
Core i7 2600K 3.4GHz @ 4.5GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / SSD: Crucial M4 128GB (+ HDDs) / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 4GBXL RipJaws X - 16GB total / PSU: Seasonic S12II 620W.
Secondary rig:
Core i3 540 3.06GHz @ Stock / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 2x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 4GB total / PSU: FSP ATX350-PNR 350W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
User avatar
The Coolest
Site Admin
Site Admin
 
Posts: 2461
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel

Return to Discussion

Who is online

Users browsing this forum: No registered users and 3 guests