Coret Temp reads 0

by **slagneb** » Wed Jan 26, 2011 4:21 am

After using core temp for a while it would read 0 degrees for all processors. I recovered to a previous date and it worked again but it soon went out again. I am using an AMD 965 BE chip on a MSI 870-g54 main board. Please help

by **The Coolest** » Wed Jan 26, 2011 9:38 am

Please see Core Temp FAQ section #6.
viewtopic.php?f=63&t=892

by **maurry40** » Sun Jan 30, 2011 12:20 am

i now for me ,, if i set the BIOS on the CPU settings to unleash the cores (on the same CPU as you )
i also get readings of 0 right across all 4 processors...seems odd that once you set the BIOS to actually set loose the 4 prossecors that you dont get any readings anymore
i suppose it is to do with the varyiong temps acrros rthe face of the prossecor and the fact the mother board can only read the core O temp

by **The Coolest** » Sun Jan 30, 2011 12:38 am

The problem is that ACC for whatever reason disables the access to the thermal sensor on the chip, thus not giving any readings.
AMD CPUs only report the temperature for the whole processor (CPU 0) not the first core (core 0).

Coret Temp reads 0

Coret Temp reads 0

Re: Coret emp reads 0

Re: Coret Temp reads 0

Re: Coret Temp reads 0

Who is online


	Author Message Coret Temp reads 0 by slagneb » Wed Jan 26, 2011 4:21 am After using core temp for a while it would read 0 degrees for all processors. I recovered to a previous date and it worked again but it soon went out again. I am using an AMD 965 BE chip on a MSI 870-g54 main board. Please help slagneb Registered User Posts: 1 Joined: Wed Jan 26, 2011 4:18 am Top Re: Coret emp reads 0 by The Coolest » Wed Jan 26, 2011 9:38 am Please see Core Temp FAQ section #6. viewtopic.php?f=63&t=892 Member of our O/C Folding @ Home team "<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now! Main rig: Core i7 2600K 3.4GHz @ 4.5GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / SSD: Crucial M4 128GB (+ HDDs) / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 4GBXL RipJaws X - 16GB total / PSU: Seasonic S12II 620W. Secondary rig: Core i3 540 3.06GHz @ Stock / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 2x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 4GB total / PSU: FSP ATX350-PNR 350W. Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors The Coolest Site Admin Posts: 2240 Joined: Tue Feb 18, 2003 7:48 pm Location: Tel Aviv, Israel Website ICQ YIM Top Re: Coret Temp reads 0 by maurry40 » Sun Jan 30, 2011 12:20 am i now for me ,, if i set the BIOS on the CPU settings to unleash the cores (on the same CPU as you ) i also get readings of 0 right across all 4 processors...seems odd that once you set the BIOS to actually set loose the 4 prossecors that you dont get any readings anymore i suppose it is to do with the varyiong temps acrros rthe face of the prossecor and the fact the mother board can only read the core O temp maurry40 Registered User Posts: 3 Joined: Sat Jan 29, 2011 11:26 pm Top Re: Coret Temp reads 0 by The Coolest » Sun Jan 30, 2011 12:38 am The problem is that ACC for whatever reason disables the access to the thermal sensor on the chip, thus not giving any readings. AMD CPUs only report the temperature for the whole processor (CPU 0) not the first core (core 0). Member of our O/C Folding @ Home team "<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now! Main rig: Core i7 2600K 3.4GHz @ 4.5GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / SSD: Crucial M4 128GB (+ HDDs) / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 4GBXL RipJaws X - 16GB total / PSU: Seasonic S12II 620W. Secondary rig: Core i3 540 3.06GHz @ Stock / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 2x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 4GB total / PSU: FSP ATX350-PNR 350W. Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors The Coolest Site Admin Posts: 2240 Joined: Tue Feb 18, 2003 7:48 pm Location: Tel Aviv, Israel Website ICQ YIM Top


	Who is online Users browsing this forum: No registered users and 2 guests