totally bogus freq reading

Post about bugs you find in Core Temp so they can be addressed and fixed efficiently
Post Reply
NoBugsOnMe
Registered User
Registered User
Posts: 22
Joined: Fri Dec 07, 2007 3:19 am

totally bogus freq reading

Post by NoBugsOnMe »

Intel i5 on an MSI p55-53 board

I've set my BIOS to not use any eist or any variance.

Everest reports a stable clock , but CPUID is all over the place reporting 9X and 20X multipliers every two seconds

Tried the alt method and its even worse.

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: totally bogus freq reading

Post by The Coolest »

The upcoming version should fix frequency detection.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

NoBugsOnMe
Registered User
Registered User
Posts: 22
Joined: Fri Dec 07, 2007 3:19 am

Re: totally bogus freq reading

Post by NoBugsOnMe »

ok, thanks. Is it hard to do correctly?

GigaByte
Registered User
Registered User
Posts: 46
Joined: Fri Dec 07, 2007 7:31 pm

Re: totally bogus freq reading

Post by GigaByte »

My i7 920 D0 also has wrong freq.

jarablue
New User
Posts: 1
Joined: Thu Apr 29, 2010 7:29 am

Re: totally bogus freq reading

Post by jarablue »

Mine has 1. wrong frequency 2. wrong stepping version 3. wrong temps.

Was this the april fools release?

Good program...uh otherwise.
Last edited by jarablue on Thu Apr 29, 2010 8:13 am, edited 1 time in total.

HallowedSoul
New User
Posts: 1
Joined: Thu Apr 29, 2010 7:31 am

Re: totally bogus freq reading

Post by HallowedSoul »

here is the multiplier problem:

Image

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: totally bogus freq reading

Post by The Coolest »

There are two different things:
1. There is a problem where you simply see completely insane numbers as the frequency, that is a bug.
2. The "low" clock speed. Here's the explanation why you see that:
The Coolest wrote:Core Temp's new algorithm basically measure the CPU's active clock cycles, and calculates the frequency based on that. Even if you disable speedstep, when the CPU is idle it skips clock cycles to save on power. Since this is the proper way to read clock speed for the Core i* series CPUs I thought I'd implement it for the C2D chips as well since the same code just works on these chips too.
I may have to revert back to the old way of speed detection for those processors, I'm still thinking about how to proceed.
Try to run Prime or superpi, you'll see it clock right up.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

bjjones
New User
Posts: 1
Joined: Sat May 01, 2010 6:34 pm

Re: totally bogus freq reading

Post by bjjones »

already reported bug, just thought I'd let you know it has the same issue on an i860. Went back to 99.5 and it's correct again, 99.6 shows very low multipliers and freq that bounce all over. Temp part seems to look about the same on both versions. Thanks for the handy little pgm - BJ

dbasinger
New User
Posts: 1
Joined: Wed May 12, 2010 12:38 pm

Re: totally bogus freq reading

Post by dbasinger »

Hate to add more of the obvious, but ditto on the insane
CoreTemp0996.jpg
You do not have the required permissions to view the files attached to this post.

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: totally bogus freq reading

Post by The Coolest »

Please see this post.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: totally bogus freq reading

Post by The Coolest »

I have a new beta up, please give it a go:
http://www.alcpu.com/forums/viewtopic.php?p=3426#p3426
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

Post Reply

Return to “Bug reports”