ALCPU Forums

Hi,

I am finding (since about 1.10) that after refreshing settings -- SOMETIMES -- some cores (randomly) report offset to TjMax.
I say randomly because it isn't consistently the same core temp value each time.

The option to "Display the distance to TjMax in Temperature fields" is unselected.
And the opposite behaviour isn't seen (i.e. when you SELECT the display as offset to TjMax you don't see random normal temperature read-out on any of the cores).

I have included a screen-shot, the motherboard is a Gigabyte B85M-HD3:

I always found this issue to be odd. It was reported in the past, but very isolated cases.
Does it only happen with the last 2 cores or is it random?
Does the temperature read 0C at times as well? If sometimes it does report 0C, try turning on the TjMax distance option and check whether it still shows 0C or 100C.

Hiya,

Just in case you was not aware, this is still happening. I have just downloaded this on my home PC. It's either the 3rd Core or 4th or them together that this is happening on. (For me anyway)

I have been using this software on my work Laptop (duel-core) no issues at all.

I think it may be a quad-core issue?

Thanks for the support

Yes I'm aware that it's still a problem, I'll try to address this in the next update.
As a temporary work around, if you press F5 (or File-->Refresh) it may fix the problem.

Hiya,

Thank you for your response f5 does the trick.



Liam