Login | Register

Incorrect Voltage and FSB Reporting

Post about bugs you find in Core Temp so they can be addressed and fixed efficiently
  • Author
    Message

Incorrect Voltage and FSB Reporting

Postby flopticalcube » Mon Sep 12, 2016 1:07 am

I am using Core Temp 1.3 on an A8-4500M and it incorrectly (or not at all) reports voltages below 0.8V. the FSB is listed as 66.67MHz rather than 100MHz.
Last edited by flopticalcube on Mon Sep 12, 2016 3:00 pm, edited 1 time in total.
flopticalcube
Registered User
Registered User
 
Posts: 4
Joined: Mon Sep 12, 2016 1:04 am

Re: Incorrect Voltage and FSB Reporting

Postby The Coolest » Mon Sep 12, 2016 10:15 am

Please attach a screenshot and a register dump (Tools menu)
Member of our O/C Folding @ Home team
"<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now!
Main rig:
Core i7 2600K 3.4GHz @ 4.5GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / SSD: Crucial M4 128GB (+ HDDs) / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 4GBXL RipJaws X - 16GB total / PSU: Seasonic S12II 620W.
Secondary rig:
Core i3 540 3.06GHz @ Stock / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 2x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 4GB total / PSU: FSP ATX350-PNR 350W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
User avatar
The Coolest
Site Admin
Site Admin
 
Posts: 2961
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel

Re: Incorrect Voltage and FSB Reporting

Postby flopticalcube » Mon Sep 12, 2016 2:06 pm

Files attached. Voltage should read 0.75V at this point (P6 state) but reads 1.55V. FSB is actually around 100MHz.
I noticed that CPU-Z also reports 1.55V for under 0.8V but AMD OverDrive reports the correct voltages.
flopticalcube
Registered User
Registered User
 
Posts: 4
Joined: Mon Sep 12, 2016 1:04 am

Re: Incorrect Voltage and FSB Reporting

Postby The Coolest » Mon Sep 12, 2016 4:52 pm

Sorry, but I don't see anything.
Member of our O/C Folding @ Home team
"<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now!
Main rig:
Core i7 2600K 3.4GHz @ 4.5GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / SSD: Crucial M4 128GB (+ HDDs) / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 4GBXL RipJaws X - 16GB total / PSU: Seasonic S12II 620W.
Secondary rig:
Core i3 540 3.06GHz @ Stock / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 2x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 4GB total / PSU: FSP ATX350-PNR 350W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
User avatar
The Coolest
Site Admin
Site Admin
 
Posts: 2961
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel

Re: Incorrect Voltage and FSB Reporting

Postby flopticalcube » Tue Sep 13, 2016 1:26 am

I'll try again...
Attachments
CoreTempError.PNG
Screen grab
CoreTempError.PNG (15.36 KiB) Viewed 1211 times
CoreTemp-Dump.txt
Dump
(51.87 KiB) Downloaded 64 times
flopticalcube
Registered User
Registered User
 
Posts: 4
Joined: Mon Sep 12, 2016 1:04 am

Re: Incorrect Voltage and FSB Reporting

Postby The Coolest » Tue Sep 13, 2016 1:52 am

Thanks. It worked this time.
I assume that other tools detect the frequency correctly at 100MHz?
Member of our O/C Folding @ Home team
"<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now!
Main rig:
Core i7 2600K 3.4GHz @ 4.5GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / SSD: Crucial M4 128GB (+ HDDs) / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 4GBXL RipJaws X - 16GB total / PSU: Seasonic S12II 620W.
Secondary rig:
Core i3 540 3.06GHz @ Stock / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 2x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 4GB total / PSU: FSP ATX350-PNR 350W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
User avatar
The Coolest
Site Admin
Site Admin
 
Posts: 2961
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel

Re: Incorrect Voltage and FSB Reporting

Postby flopticalcube » Tue Sep 13, 2016 1:54 am

Correct.
flopticalcube
Registered User
Registered User
 
Posts: 4
Joined: Mon Sep 12, 2016 1:04 am

Return to Bug reports

Who is online

Users browsing this forum: Bing [Bot] and 1 guest