Login | Register

Core Temp 1.1 - 1.8.1 - Driver failed to load

Post about bugs you find in Core Temp so they can be addressed and fixed efficiently
  • Author
    Message

Re: Core Temp 1.1 - 1.7 - Driver failed to load

Postby catcher40 » Fri May 19, 2017 7:37 pm

Any news on the driver not loading problem with windows 10 x64 pro creators update. still using CT10-rc9.
catcher40
New User
 
Posts: 2
Joined: Fri May 19, 2017 7:34 pm

Re: Core Temp 1.1 - 1.7 - Driver failed to load

Postby The Coolest » Fri May 19, 2017 8:15 pm

After what seemed like an eternity and a lot of headaches and runabouts, I can finally say that my certificate is on its way.
So I hope that within 2-4 weeks I should have it and be able to sign drivers in a way that Win10 will find acceptable.
Member of our O/C Folding @ Home team
"<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now!
Main rig:
Core i7 2600K 3.4GHz @ 4.5GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / SSD: Crucial M4 128GB (+ HDDs) / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 4GBXL RipJaws X - 16GB total / PSU: Seasonic S12II 620W.
Secondary rig:
Core i3 540 3.06GHz @ Stock / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 2x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 4GB total / PSU: FSP ATX350-PNR 350W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
User avatar
The Coolest
Site Admin
Site Admin
 
Posts: 2951
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel

Re: Core Temp 1.1 - 1.7 - Driver failed to load

Postby catcher40 » Fri May 19, 2017 9:23 pm

Nice, thank you for all the time and effort you've put into this.
catcher40
New User
 
Posts: 2
Joined: Fri May 19, 2017 7:34 pm

Re: Core Temp 1.1 - 1.7 - Driver failed to load

Postby justen_m » Sat May 20, 2017 1:18 am

Yes, thanks for all the effort! My systems feel naked without Core Temp running and the temps down in my task bar for each core.

I just wiped the drive on my old system, re-installed Windows 10 Creators Update, and Core Temp 1.7 wouldn't work. It did before. Reading this entire thread, I realized why. My old system, I turned off Secure Boot. This time, I wanted to keep it around, probably best, security-wise heading into the future. I downloaded 1.0rc9 that you linked to and that works fine with Secure Boot enabled. Thanks for that link, too.

So, in 2-4 weeks, what new version will have the new certificate? 1.8... or 2.0! :)
justen_m
Registered User
Registered User
 
Posts: 3
Joined: Sat May 20, 2017 1:01 am

Re: Core Temp 1.1 - 1.7 - Driver failed to load

Postby fjsorg » Sat May 20, 2017 10:05 am

The Coolest wrote:After what seemed like an eternity and a lot of headaches and runabouts, I can finally say that my certificate is on its way.
So I hope that within 2-4 weeks I should have it and be able to sign drivers in a way that Win10 will find acceptable.


Hello The Coolest,
With your latest version, I did not have a crash to load the drivers.
To see with time

lol FJ
fjsorg
Registered User
Registered User
 
Posts: 14
Joined: Mon Apr 24, 2017 10:41 pm
Location: France

Re: Core Temp 1.1 - 1.7 - Driver failed to load

Postby The Coolest » Sat May 20, 2017 10:07 am

@justen_m

It could be a hotfix, or a new version, depending on the state of development. Since I don't consider this to be a new feature, or even a bug fix.

@fjsorg

This is only a problem on Clean Win10 Anniversary\Creator's Update installations with Secure Boot enabled in the BIOS.
Member of our O/C Folding @ Home team
"<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now!
Main rig:
Core i7 2600K 3.4GHz @ 4.5GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / SSD: Crucial M4 128GB (+ HDDs) / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 4GBXL RipJaws X - 16GB total / PSU: Seasonic S12II 620W.
Secondary rig:
Core i3 540 3.06GHz @ Stock / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 2x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 4GB total / PSU: FSP ATX350-PNR 350W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
User avatar
The Coolest
Site Admin
Site Admin
 
Posts: 2951
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel

Re: Core Temp 1.1 - 1.7 - Driver failed to load

Postby justen_m » Sat May 20, 2017 3:34 pm

The Coolest wrote:It could be a hotfix, or a new version, depending on the state of development. Since I don't consider this to be a new feature, or even a bug fix.

We know it's not a bug. Don't make it a hotfix! This isn't a bugfix, but it adds support for a new version of Windows. That _is_ new functionality. As a software engineer (retired), I am saying, I think this merits a bump to 2.0. It will help you, support-wise. Just tell people to upgrade. Much easier than explaining why they should. You have the opportunity to cut support for antique software. Take it!
justen_m
Registered User
Registered User
 
Posts: 3
Joined: Sat May 20, 2017 1:01 am

Re: Core Temp 1.1 - 1.7 - Driver failed to load

Postby The Coolest » Sat May 20, 2017 4:31 pm

Well, my perspective on this is a little different.
It's Microsoft's artificial limitation imposed on software developers. Core Temp still runs fine on all Windows 10 releases if that 'feature' of the OS is disabled.
Also, up until a few years ago Core Temp even ran on Windows NT 3.51, but sadly after I moved away from Visual Studio 2008, it became impossible, so right now it requires a minimum of Win2k + sp4 + a few hotfixes. Personally, I like backward compatibility, a lot :)
Member of our O/C Folding @ Home team
"<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now!
Main rig:
Core i7 2600K 3.4GHz @ 4.5GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / SSD: Crucial M4 128GB (+ HDDs) / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 4GBXL RipJaws X - 16GB total / PSU: Seasonic S12II 620W.
Secondary rig:
Core i3 540 3.06GHz @ Stock / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 2x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 4GB total / PSU: FSP ATX350-PNR 350W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
User avatar
The Coolest
Site Admin
Site Admin
 
Posts: 2951
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel

Re: Core Temp 1.1 - 1.7 - Driver failed to load

Postby fjsorg » Sat May 20, 2017 7:20 pm

The Coolest wrote:Well, my perspective on this is a little different.
It's Microsoft's artificial limitation imposed on software developers. Core Temp still runs fine on all Windows 10 releases if that 'feature' of the OS is disabled.
Also, up until a few years ago Core Temp even ran on Windows NT 3.51, but sadly after I moved away from Visual Studio 2008, it became impossible, so right now it requires a minimum of Win2k + sp4 + a few hotfixes. Personally, I like backward compatibility, a lot :)



Hello,

I do not agree. I have a lot of PCs under W10 (a dozen, Acer, Asus, Dell, HP, " in Secure Boot " under 1607 and 1703 ... with Core Temp 1.7 ... there is no problem.

The problem, it is serious, but hardware ... Motherboard Asus latest generation ... Like mine X99 ... I am not too dissatisfied, but in three years I had good numbers of bugs

But maybe I'm not on the right topic

But if you speak French, tell me in MP. I'm not sure I understand English. Sorry
fjsorg
Registered User
Registered User
 
Posts: 14
Joined: Mon Apr 24, 2017 10:41 pm
Location: France

Re: Core Temp 1.1 - 1.7 - Driver failed to load

Postby fjsorg » Sat May 20, 2017 9:40 pm

Hello,


I will continue there, The Coolest , You will move as needed

(Asus X99-Deluxe/ i7-5820K)

http://i.imgur.com/zuuXRJs.jpg

http://i.imgur.com/eWWAoMt.jpg >>>>> But if I put Storages Devices, preferably Uefi drivers ... Ben it changes nothing at all ... for Core Temp ... for W7 / W8.1 and W10 this boot

http://i.imgur.com/DAkewlF.jpg

Ok ^^^^ ?

If something is not good ... say it ?

I boot in safe mode under W10 Pro 1703 (is installed in Uefi)

... in Legacy under Pro W7 / W8.1 (It is installed in double boot mbr)

It's correct ? ^^^^

I do not know, but it works ... Not without evil ... lol ... ah ah ah

@ + FJ
fjsorg
Registered User
Registered User
 
Posts: 14
Joined: Mon Apr 24, 2017 10:41 pm
Location: France

Re: Core Temp 1.1 - 1.7 - Driver failed to load

Postby The Coolest » Sat May 20, 2017 11:34 pm

Well, i don't know how it works, as long as it does.
Microsoft does allow to load drivers in some situations, I guess in your specific case it works.
Member of our O/C Folding @ Home team
"<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now!
Main rig:
Core i7 2600K 3.4GHz @ 4.5GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / SSD: Crucial M4 128GB (+ HDDs) / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 4GBXL RipJaws X - 16GB total / PSU: Seasonic S12II 620W.
Secondary rig:
Core i3 540 3.06GHz @ Stock / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 2x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 4GB total / PSU: FSP ATX350-PNR 350W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
User avatar
The Coolest
Site Admin
Site Admin
 
Posts: 2951
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel

Re: Core Temp 1.1 - 1.7 - Driver failed to load

Postby fjsorg » Mon May 22, 2017 1:48 pm

The Coolest wrote:Well, i don't know how it works, as long as it does.
Microsoft does allow to load drivers in some situations, I guess in your specific case it works.



Hello,

I'm talking about PC builder, laptop in general.
fjsorg
Registered User
Registered User
 
Posts: 14
Joined: Mon Apr 24, 2017 10:41 pm
Location: France

Re: Core Temp 1.1 - 1.7 - Driver failed to load

Postby matsuda0707 » Sun Jun 11, 2017 1:57 am

I installed 1.8 today, but error telling "driver failed to load" sa same sa 1.7.1.
My PC is MS Surface pro 3 and Windows10 pro 1703 (creative update).
Last edited by matsuda0707 on Sun Jun 11, 2017 6:55 am, edited 1 time in total.
matsuda0707
Registered User
Registered User
 
Posts: 9
Joined: Wed Aug 18, 2010 10:55 am

Re: Core Temp 1.1 - 1.7 - Driver failed to load

Postby siliconman01 » Sun Jun 11, 2017 5:24 am

"Driver failed to load" error continues to occur with Core Temp V1.8.1 on Windows 10x64 Pro Build 15063.332 V1703. :(
Windows 10 x64 Pro on ASUS Maximus VIII Extreme motherboard, i7-6700k CPU, 64 gbyte RipJaws DDR4 3200 RAM, Samsung 950 Pro NVMe M.2 512 gbyte SSD, Samsung 850 Pro 512 gbyte SSD, EVGA Nvidia GeForce 980 Ti (Home Built System)
Windows 10 x64 Pro on Dell 8700 SE desktop, Intel i7 4770 CPU, 24 gbyte RAM, Samsung 850 EVO mSata 512 gbyte SSD, Samsung 850 Pro 512 gbyte SSD, AMD R270 graphics,
Windows 10 x64 Pro on Dell XPS 410 desktop, 16 gbyte RAM, Intel CPU, GeForce Nvidia 750 Ti graphics: Windows 10 x64 Pro on 128 gbyte MS Surface Pro tablet
ASUS RT-AC88U router, 8 tbyte WD My Cloud Mirror.External Drive, 100 Mbps cable Internet, Google Chrome, MS Office 2016 (Local), Casper 10, DisplayFusion (3 Flat Panel Displays per system)
Bitdefender Internet Security 2018, Malwarebytes 3, SpywareBlaster, HostsMan, Quicken, Weather Watcher Live, Corel Paintshop Pro, Sticky Password 8, Unchecky, Sonic Suite 2, WD Smartware, CyberLink PowerDVD 17, and many more.
siliconman01
Registered User
Registered User
 
Posts: 14
Joined: Thu Aug 04, 2016 5:39 am

Re: Core Temp 1.1 - 1.7 - Driver failed to load

Postby spooki3 » Mon Jun 12, 2017 3:05 pm

Hi The Coolest

I believe the driver failed to load problem is limited to Asus products. Loads lot of different PC's in a month and only Asus motherboard Pc gives this error by me. All other work fine even with 1.81 but Asus boards all give driver load problem.

Maybe it is hardware compatibility problem with Asus boards.
spooki3
New User
 
Posts: 1
Joined: Mon Jun 12, 2017 2:50 pm

Re: Core Temp 1.1 - 1.7 - Driver failed to load

Postby The Coolest » Mon Jun 12, 2017 4:12 pm

It's not, please read first post.
Member of our O/C Folding @ Home team
"<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now!
Main rig:
Core i7 2600K 3.4GHz @ 4.5GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / SSD: Crucial M4 128GB (+ HDDs) / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 4GBXL RipJaws X - 16GB total / PSU: Seasonic S12II 620W.
Secondary rig:
Core i3 540 3.06GHz @ Stock / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 2x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 4GB total / PSU: FSP ATX350-PNR 350W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
User avatar
The Coolest
Site Admin
Site Admin
 
Posts: 2951
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel

Re: Core Temp 1.1 - 1.7 - Driver failed to load

Postby gk1957 » Wed Jun 14, 2017 3:46 pm

I'd like to report that CoreTemp 1.8.1 loads successfully on my ASUS Z170-PRO MB running Win 10 x64 Pro v1703 (w/June patches). I had checked v1.7 in March and it was not working. Since then, I've installed the v1703 Win 10 feature update and at least one BIOS update. I'm guessing one (or both) of those two updates helped!
gk1957
New User
 
Posts: 2
Joined: Mon Aug 15, 2016 3:56 am

Re: Core Temp 1.1 - 1.7 - Driver failed to load

Postby fjsorg » Thu Jun 15, 2017 10:41 am

Hello,

Sorry, on all my PC under W10, they support very well version 1.8.1

On my main machine (Asus X99-Deluxe, i7-5820K), under W10 OK version 1.8.1, under W7 / W8.1 error load drivers every time, back to Core Temp 1.7.1
(Finally under W8.1, this is load error with both versions, 1.7.1 and 1.8.1)


Greetings
Last edited by fjsorg on Fri Jun 16, 2017 7:22 am, edited 1 time in total.
fjsorg
Registered User
Registered User
 
Posts: 14
Joined: Mon Apr 24, 2017 10:41 pm
Location: France

Re: Core Temp 1.1 - 1.7 - Driver failed to load

Postby fjsorg » Thu Jun 15, 2017 10:09 pm

spooki3 wrote:Hi The Coolest

I believe the driver failed to load problem is limited to Asus products. Loads lot of different PC's in a month and only Asus motherboard Pc gives this error by me. All other work fine even with 1.81 but Asus boards all give driver load problem.

Maybe it is hardware compatibility problem with Asus boards.



Hello,

It is almost certain

(On Asus Rog G75V, with W10 and version 1.8.1 no load worries)
fjsorg
Registered User
Registered User
 
Posts: 14
Joined: Mon Apr 24, 2017 10:41 pm
Location: France

Re: Core Temp 1.1 - 1.7 - Driver failed to load

Postby Naki » Sat Jun 17, 2017 11:56 am

Exactly nothing to do with ASUS or any one particular mainboard manufacturer, sorry! The program's creator already explained the issue reason quite clearly several times, so please do not question that.
You could have as ASUS or ASRock or GIGABYTE/etc mainboard, and it could fail. And you could have another one from same brand, but a different socket/generation, and it could work just fine with Core Temp.
So, not brand-dependent at all - likely more like some Intel chipsets/mobos work, others not. Same for AMD ones.

Please note Core Temp, any version, works fine for me on 6-7 separate WIndows 10 PCs, but these are all quite old compared to what is popular in 2016-2017 - most of them are Intel socket 1155, with just 2-3 PCs on the a bit newer socket 1150.
So, I tend to think older mobos more likely work, and newer ones are more likely to fail.
Naki
Registered User
Registered User
 
Posts: 129
Joined: Sun Oct 14, 2012 2:13 pm
Location: Eastern Europe

Re: Core Temp 1.1 - 1.7 - Driver failed to load

Postby Jacob Klein » Sat Jun 17, 2017 12:50 pm

Naki wrote:...
The program's creator already explained the issue reason quite clearly several times, so please do not question that.
...
likely more like some Intel chipsets/mobos work, others not. Same for AMD ones.
...
So, I tend to think older mobos more likely work, and newer ones are more likely to fail.


Why would you say "the dev made it clear what the issue is", and then you continue to guess?!?
Did you even READ post 1? Did you even LOOK at the reference links within post 1?

Let me try to clear it up for you a bit.

It is my understanding that 64-bit PCs, running a modern updated/patched 64-bit OS, recently require that signed drivers be signed more-stringently (drivers must be signed with newer safer algorithms). The dev had to work out how to purchase materials needed to make that happen. The fix has not yet been released. We suspect that the problem may be limited to users who are running "Safe Boot" in their BIOS. If you are hitting the problem currently, then turning "Secure Boot" to OFF in your BIOS, *might* help as a workaround, as it seems the OS recognizes this and relaxes the security a bit. Or you could use 1.0 RC9, which was signed at a "digital signature time" that was before the cutoff, and as such is still "accepted" by the OS, allowing the driver to load, even if "Secure Boot" is ON.

It has NOTHING to do with CPU type or motherboard manufacturer. Sheesh.
Jacob Klein
Registered User
Registered User
 
Posts: 27
Joined: Mon Jul 04, 2016 10:33 pm

Re: Core Temp 1.1 - 1.7 - Driver failed to load

Postby Naki » Sat Jun 17, 2017 9:16 pm

I am NOT hitting the problem currently, on ANY of my many PCs - all running Windows 10 64-bit OS, all using Secure Boot/UEFI AND latest Core Temp version. Yes, the developer explained this clearly. I am sorry if you cannot get it.
I do know newer PCs, which I have none of, cannot properly work sometimes.

I am not guessing anything. The issue is clear and will be fixed, it just takes some time (and cash to be paid by the dev!).
Naki
Registered User
Registered User
 
Posts: 129
Joined: Sun Oct 14, 2012 2:13 pm
Location: Eastern Europe

Re: Core Temp 1.1 - 1.7 - Driver failed to load

Postby Jacob Klein » Sat Jun 17, 2017 9:21 pm

Secure boot is an option within the UEFI settings. Are you absolutely sure you have it enabled? Also, are you absolutely on version 1703 or 1607? Just trying to learn more about the issue.
Jacob Klein
Registered User
Registered User
 
Posts: 27
Joined: Mon Jul 04, 2016 10:33 pm

Re: Core Temp 1.1 - 1.7 - Driver failed to load

Postby The Coolest » Sat Jun 17, 2017 10:01 pm

This issue affects systems that have Secure Boot enabled and have a clean Windows 10 Anniversary or Creator's update install. If you had the original Windows 10 (or older version) installed and then upgraded to the latest release, your system won't be affected.
It's possible that there will be situations in which this digital signature enforcement will be disabled even on clean installs, but I'm not aware of what it may be.
Member of our O/C Folding @ Home team
"<The_Coolest> you can't unwaste wasted CPU cycles" - Start FOLDing now!
Main rig:
Core i7 2600K 3.4GHz @ 4.5GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / SSD: Crucial M4 128GB (+ HDDs) / GPU: HD5450 / Mem: 4x4GB DDR3-1600 G.Skill 4GBXL RipJaws X - 16GB total / PSU: Seasonic S12II 620W.
Secondary rig:
Core i3 540 3.06GHz @ Stock / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 2x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 4GB total / PSU: FSP ATX350-PNR 350W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
User avatar
The Coolest
Site Admin
Site Admin
 
Posts: 2951
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel

Re: Core Temp 1.1 - 1.7 - Driver failed to load

Postby Jacob Klein » Sun Jun 18, 2017 12:50 am

Thank you for the clarification!
Jacob Klein
Registered User
Registered User
 
Posts: 27
Joined: Mon Jul 04, 2016 10:33 pm

PreviousNext

Return to Bug reports

Who is online

Users browsing this forum: No registered users and 2 guests