Core Temp 1.1 - 1.8.1 - Driver failed to load

Post about bugs you find in Core Temp so they can be addressed and fixed efficiently
MKCBrown7
New User
Posts: 1
Joined: Sat Aug 20, 2016 8:56 pm

Re: Core Temp 1.1/1.2 - Driver failed to load

Post by MKCBrown7 »

I'm getting the same error with my Windows 10 64-bit system...

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: Core Temp 1.1/1.2 - Driver failed to load

Post by The Coolest »

Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

Naki
Registered User
Registered User
Posts: 213
Joined: Sun Oct 14, 2012 2:13 pm
Location: Eastern Europe
Contact:

Re: Core Temp 1.1/1.2 - Driver failed to load

Post by Naki »

Do you plan to fix UEFI mode driver load, please?
A friend has a Intel Core i7 6700K CPU on a new GIGBYTE mobo.

Screenshot:
Image

When he turns off UEFI, i.e. sets that from Windows UEFI mode in the BIOS/UEFI to Other setting, driver then works & loads fine, shot:
Image

This is on Windows 10 Anniversary Edition. It is possible pre-Anniversary versions/builds of Windows 10 did not have this issue.

Any comments, please? Will this be fixed soon (or not so soon, but still planned)?
When UEFI is turned off in BIOS, any benefits of quick Windows 10 loading in UEFI mode - Fast Boot/Ultra Fast Boot are lost, so not a good workaround.
Please also note Real Temp handles this fine (although my friend says it shows wrong temps for his Intel Core i7 CPU).
Can you not work with Real Temp author to help fix this driver issue?

Can we somehow help you fix this? I.e. send money, do testing/etc? :)

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: Core Temp 1.1/1.2 - Driver failed to load

Post by The Coolest »

Hi Naki,

I do plan to get this fixed. At the moment I'm waiting to hear back from my current digital signature provider about a possible upgrade to the EV certificate, which will allow me to get the drivers signed by Microsoft. I still don't know how much it will cost, or whether it's even possible. From a quick look-around I've done, it seems that a 3-year EV certificate can cost about $1000. I've never actively asked anyone for help, but this time I may actually need some help funding this. I don't want to speak too soon, though, and I'll update this thread as soon as there are news about this issue.

At least for the moment, 1.0 RC9 should still work fine.
http://www.alcpu.com/CoreTemp/oldversions/CT10-rc9.zip
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

Naki
Registered User
Registered User
Posts: 213
Joined: Sun Oct 14, 2012 2:13 pm
Location: Eastern Europe
Contact:

Re: Core Temp 1.1/1.2 - Driver failed to load

Post by Naki »

OK then. Thanks for the update! Please keep us posted.

KriS_TsT
New User
Posts: 2
Joined: Sun Sep 04, 2016 5:35 am

Re: Core Temp 1.1/1.2 - Driver failed to load

Post by KriS_TsT »

Hi Guys, It looks like it can be somehow linked to the UEFI Secure Boot. I was unable to open CoreTemp (driver error) but after re-installing Windows with Secure Boot - off it works like a dream. Before clean install I had a problem with Asus Intel XTU as well. Secure boot is an evil=] :twisted:
MB: Asus RVE10, Processor: Intel 6950x

KriS_TsT
New User
Posts: 2
Joined: Sun Sep 04, 2016 5:35 am

Re: Core Temp 1.1/1.2 - Driver failed to load

Post by KriS_TsT »

Yes, it is definitely Secure boot. When I turn on it in bios coretemp wont load...(Windows 10 Update 1).

AJDeBres
Registered User
Registered User
Posts: 3
Joined: Mon Sep 05, 2016 4:33 pm

Core Temp Windows 10 Anniversary Build 14393

Post by AJDeBres »

For those of you having issues with Windows 10 build 14393 and Core Temp (Driver Failed to load) issue. After you download the V1.2 installer for Core temp go into the properties (before running setup) compatibility tab, hit the drop down and choose windows 7 click ok, then run the installer. This is the way I got it working. please reply and let me know if it worked or didn't work. thanks and good luck!

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: Core Temp 1.1/1.2 - Driver failed to load

Post by The Coolest »

Please see the post above for a possible solution.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

siliconman01
Registered User
Registered User
Posts: 14
Joined: Thu Aug 04, 2016 5:39 am

Re: Core Temp Windows 10 Anniversary Build 14393

Post by siliconman01 »

AJDeBres wrote:For those of you having issues with Windows 10 build 14393 and Core Temp (Driver Failed to load) issue. After you download the V1.2 installer for Core temp go into the properties (before running setup) compatibility tab, hit the drop down and choose windows 7 click ok, then run the installer. This is the way I got it working. please reply and let me know if it worked or didn't work. thanks and good luck!
Did not work for me on Windows 10 x64 Pro Build 14393.105 :(
Windows 10 x64 Pro on ASUS Maximus VIII Extreme motherboard, i7-6700k CPU, 64 gbyte RipJaws DDR4 3200 RAM, Samsung 970 Pro NVMe M.2 512 gbyte SSD, Samsung 850 Pro 512 gbyte SSD, EVGA Nvidia GeForce 980 Ti (Home Built System)
Windows 10 x64 Pro on Dell 8700 SE desktop, Intel i7 4770 CPU, 24 gbyte RAM, Samsung 850 EVO mSata 512 gbyte SSD, Samsung 850 Pro 512 gbyte SSD, AMD R270 graphics,
Windows 10 x64 Pro on Dell XPS 15 (9575) 2in1 laptop/tablet
ASUS RT-AC88U router, 8 tbyte WD My Cloud Mirror.External Drive, 100 Mbps cable Internet, Google Chrome, MS Office 2016 (Local), Casper 10, DisplayFusion (3 Flat Panel Displays per system)
Kaspersky Internet Security 2020, Malwarebytes 3, SpywareBlaster, HostsMan, Quicken, Weather Watcher Live, Sticky Password 8, Unchecky, WD Smartware, CyberLink PowerDVD 19, and many more.

AJDeBres
Registered User
Registered User
Posts: 3
Joined: Mon Sep 05, 2016 4:33 pm

Re: Core Temp 1.1/1.2 - Driver failed to load

Post by AJDeBres »

I have just base 14393 what did you update making it .105? I haven't seen any updates as of yet. that sucks, still working fine for me.

siliconman01
Registered User
Registered User
Posts: 14
Joined: Thu Aug 04, 2016 5:39 am

Re: Core Temp 1.1/1.2 - Driver failed to load

Post by siliconman01 »

AJDeBres wrote:I have just base 14393 what did you update making it .105? I haven't seen any updates as of yet. that sucks, still working fine for me.
Each time Windows Update issues a KB update, it increments the revision level and this shows up as the .xxx number. There have been several updates since the Windows 10 Anniversary Update of Build 14393.
Windows10Version.png
You do not have the required permissions to view the files attached to this post.
Windows 10 x64 Pro on ASUS Maximus VIII Extreme motherboard, i7-6700k CPU, 64 gbyte RipJaws DDR4 3200 RAM, Samsung 970 Pro NVMe M.2 512 gbyte SSD, Samsung 850 Pro 512 gbyte SSD, EVGA Nvidia GeForce 980 Ti (Home Built System)
Windows 10 x64 Pro on Dell 8700 SE desktop, Intel i7 4770 CPU, 24 gbyte RAM, Samsung 850 EVO mSata 512 gbyte SSD, Samsung 850 Pro 512 gbyte SSD, AMD R270 graphics,
Windows 10 x64 Pro on Dell XPS 15 (9575) 2in1 laptop/tablet
ASUS RT-AC88U router, 8 tbyte WD My Cloud Mirror.External Drive, 100 Mbps cable Internet, Google Chrome, MS Office 2016 (Local), Casper 10, DisplayFusion (3 Flat Panel Displays per system)
Kaspersky Internet Security 2020, Malwarebytes 3, SpywareBlaster, HostsMan, Quicken, Weather Watcher Live, Sticky Password 8, Unchecky, WD Smartware, CyberLink PowerDVD 19, and many more.

AJDeBres
Registered User
Registered User
Posts: 3
Joined: Mon Sep 05, 2016 4:33 pm

Re: Core Temp 1.1/1.2 - Driver failed to load

Post by AJDeBres »

Lol I understand that you can also check it with msinfo. I was referring to whether or not you had to OPT in to the newest updates as I haven't researched much on it, too busy getting programs work after updating to anniversary.

2secret
New User
Posts: 2
Joined: Tue Sep 13, 2016 9:23 pm

Re: Core Temp 1.1/1.2 - Driver failed to load

Post by 2secret »

Hi everyone,

same thing on 1.3, or do only i have the problems?

Thanks

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: Core Temp 1.1/1.2 - Driver failed to load

Post by The Coolest »

Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

2secret
New User
Posts: 2
Joined: Tue Sep 13, 2016 9:23 pm

Re: Core Temp 1.1/1.2 - Driver failed to load

Post by 2secret »

Ok so this means you need money for the Certificate?

I´m sure a lot of ppl like your software enough, to give a few $ supporting you.

How much $ is needed by now?

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: Core Temp 1.1/1.2 - Driver failed to load

Post by The Coolest »

I've been looking around and I think I've got enough saved up right now.
The process is a little bit complicated and getting everything setup and vetted will take some time. Hopefully I will get the process started this week.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

User avatar
Muffin
New User
Posts: 2
Joined: Fri Oct 14, 2016 10:36 am
Contact:

Re: Core Temp 1.1/1.2 - Driver failed to load

Post by Muffin »

Hullo, I'd just like to report the same problem on Win10 but for 1.4.1 update.
I hope you're able to eventually get it signed without too much trouble!
And as 2secret said, if you open donations I'd be happy to support your software too :>

serkanbirkan
New User
Posts: 1
Joined: Mon Oct 17, 2016 6:25 am

Re: Core Temp 1.1/1.2 - Driver failed to load

Post by serkanbirkan »

Hello, I have the same problem on Windows 10 64bit: "Driver has failed to load". I am waiting for a solution like others.

Edit: Core Temp runs perfectly after I changed "Secure Boot" as "disabled" at BIOS.

Thank you.

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: Core Temp 1.1/1.2 - Driver failed to load

Post by The Coolest »

For anyone who would like to donate, I can only accept PayPal right now.
Whoever doesn't have a PayPal account can also use their credit card, if they don't mind doing that.
You have a Donate link right in Core Temp's Help menu.

@serkanbirkan
Disabling Secure Boot is a workaround, but not a recommended one.
If Core Temp 1.0 RC9 worked OK for you, you should consider reverting back to it for now.
http://www.alcpu.com/CoreTemp/oldversions/CT10-rc9.zip
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

mozzis
New User
Posts: 1
Joined: Sun Oct 30, 2016 11:16 pm

1.41 doesn't work on Celeron N3050

Post by mozzis »

After successful installation, program exits with "driver has failed to load" error.

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: 1.41 doesn't work on Celeron N3050

Post by The Coolest »

Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

RichK
Registered User
Registered User
Posts: 3
Joined: Wed Oct 12, 2016 1:02 pm

Re: Core Temp 1.1/1.2 - Driver failed to load

Post by RichK »

Core Temp 1.4.1 was working for me and today it stopped loading. I tried uninstalling, then reinstalling and get the driver failed to load error. I went back to 1.1 and it now is working, but reminds me that an update is available. I am on build 14931 of Win 10, i5-3770k cpu, Z77 sabertooth mobo
Error screen shots attached if helpful:

Please let me know if you need any other info
Thanks,
Rich
You do not have the required permissions to view the files attached to this post.

dragonbytes
New User
Posts: 2
Joined: Tue Nov 15, 2016 2:36 am

Re: Core Temp 1.1/1.2 - Driver failed to load

Post by dragonbytes »

I noticed the dev posted a link earlier in the thread to a windows certificate http://www.alcpu.com/forums/viewtopic.p ... =25#p14185 as a possible fix other than turning off secure boot. does that certificate actually get around the secure boot driver issue? and what exactly does the certificate do? does it allow ANY 3rd party kernel driver to load or only the one for coretemp? thanks

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: Core Temp 1.1/1.2 - Driver failed to load

Post by The Coolest »

No it does nothing to help fix this issue.
I've been extremely busy the last two months with a work related project. Once that's over with, hopefully next week, I'll be purchasing an EV certificate and begin the validation process. It's going to take some time, but I there will be a solution to this.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

Post Reply

Return to “Bug reports”