Page 1 of 1
Core Temp 1.0 RC8 didn't find any supported processors
Posted: Thu Mar 03, 2016 12:41 am
by gmini
I'm using a CPU that's supposed to be supported by the program.
The dump file created by the application is 0 Kb and there's nothing in it.
Pls advise.
Re: Core Temp 1.0 RC8 didn't find any supported processors
Posted: Thu Mar 03, 2016 4:29 pm
by The Coolest
Odd. It looks like CPU-Z isn't reading the CPU quite perfectly either, note the cache info.
Could you please post a CPU-Z TXT report? (click on the Tools drop down).
Re: Core Temp 1.0 RC8 didn't find any supported processors
Posted: Thu Mar 10, 2016 12:43 am
by gmini
The Coolest wrote:Odd. It looks like CPU-Z isn't reading the CPU quite perfectly either, note the cache info.
Could you please post a CPU-Z TXT report? (click on the Tools drop down).
here we go.
Thank you
Re: Core Temp 1.0 RC8 didn't find any supported processors
Posted: Thu Mar 10, 2016 8:17 pm
by gmini
here's what i've found:
if i turn the virtualization off in the BIOS CoreTemp would work OK.
Re: Core Temp 1.0 RC8 didn't find any supported processors
Posted: Thu Mar 10, 2016 9:10 pm
by The Coolest
Are you using virtualization for something specific or can you keep it off?
I found the problem which caused Core Temp to fail, but can't give an ETA on the fix for it just yet, as it won't be as straightforward as I hoped.
It will happen eventually, but there are currently other priorities.
Re: Core Temp 1.0 RC8 didn't find any supported processors
Posted: Fri Mar 11, 2016 10:13 pm
by gmini
The Coolest wrote:Are you using virtualization for something specific or can you keep it off?
I found the problem which caused Core Temp to fail, but can't give an ETA on the fix for it just yet, as it won't be as straightforward as I hoped.
It will happen eventually, but there are currently other priorities.
i shut the virtualization off. my VMs can run anyway (with performance slightly dropped but that's ok).
thank you for the update! hopefully you'll find some time for the fix
Best wishes