PAGE_FAULT_IN_NONPAGED_AREA
PAGE_FAULT_IN_NONPAGED_AREA
Hello,
Ill start by apologizing if this is a known issue
Seems under Windows 8 Pro 64 Bit the following CoreTemp file, ALSysIO64.sys, creates a "PAGE_FAULT_IN_NONPAGED_AREA" crash at initializing during boot time. Removing the software did resolve the issue. Also I found I found this thread confirming by doubts: http://www.eightforums.com/bsod-crashes ... l-exe.html (the dump posted in the topic is practically identical to mine...)
My config:
Windows 8 Pro 64 Bit
AMD FX-8350
Asus M5A99FX Pro R2.0
Please let me know if you require additional info. Im quite busy but ill do my best to help you out!
*edit* im running CoreTemp RC5
Ill start by apologizing if this is a known issue
Seems under Windows 8 Pro 64 Bit the following CoreTemp file, ALSysIO64.sys, creates a "PAGE_FAULT_IN_NONPAGED_AREA" crash at initializing during boot time. Removing the software did resolve the issue. Also I found I found this thread confirming by doubts: http://www.eightforums.com/bsod-crashes ... l-exe.html (the dump posted in the topic is practically identical to mine...)
My config:
Windows 8 Pro 64 Bit
AMD FX-8350
Asus M5A99FX Pro R2.0
Please let me know if you require additional info. Im quite busy but ill do my best to help you out!
*edit* im running CoreTemp RC5
- The Coolest
- Site Admin
- Posts: 3379
- Joined: Tue Feb 18, 2003 7:48 pm
- Location: Tel Aviv, Israel
- Contact:
Re: PAGE_FAULT_IN_NONPAGED_AREA
Looks like there's a real problem with AMD's FX and Core Temp RC5
I'll send you a PM.
I'll send you a PM.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.
Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.
Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
Re: PAGE_FAULT_IN_NONPAGED_AREA
I also have a AMD FX-8150 and am running windows 8. After I installed RC5, I've been having the same errors. I did leave a message on your IRC feed. Not sure if it was you idled there or not. HELP! I love this program!
Re: PAGE_FAULT_IN_NONPAGED_AREA
it was you! "the coolest" . i said reply to iphone.delaware@gmail.com well i got off my lazy butt and found you instead!
- The Coolest
- Site Admin
- Posts: 3379
- Joined: Tue Feb 18, 2003 7:48 pm
- Location: Tel Aviv, Israel
- Contact:
Re: PAGE_FAULT_IN_NONPAGED_AREA
I sent you an email last night.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.
Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.
Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
Re: PAGE_FAULT_IN_NONPAGED_AREA
so far running well. going to do a couple restarts here in a bit and will update.
-hax
-hax
Re: PAGE_FAULT_IN_NONPAGED_AREA
restarts are fine now. however instead of getting a bsod upon startup, i'm experiencing system lockups.
no memory dumps, nothing, just complete hangs. Have to press restart button when I get back to PC. Going to disable coretemp for a couple days and see if in fact that was the issue.
Will update.
-hax
no memory dumps, nothing, just complete hangs. Have to press restart button when I get back to PC. Going to disable coretemp for a couple days and see if in fact that was the issue.
Will update.
-hax
-
- Registered User
- Posts: 3
- Joined: Fri Mar 22, 2013 2:16 am
Re: PAGE_FAULT_IN_NONPAGED_AREA
Has anyone found a fix for this. I have tried every temperture program out there and nothing does it the way Core Temp does, but my AMD FX keeps crashing on reboot every time.
AMD FX8150
Asus Sabertooth R2
Help!
AMD FX8150
Asus Sabertooth R2
Help!
Re: PAGE_FAULT_IN_NONPAGED_AREA
it was coretemp causing the lockups. I have completely disabled it until I download RC4 again like i'm about to do now. i'm talking about the one that you linked me to coolest.
If you need my info for my hardware coolest, let me know, i'll provide it.
If you need my info for my hardware coolest, let me know, i'll provide it.
Re: PAGE_FAULT_IN_NONPAGED_AREA
Hello. We are a OEM of industrial controls. Each of our machines is equipped with an AMD-based computer.
I currently have a computer (Specs below) that has had the BSoD 0x50 message as well. I did some research and found it to be your software as you are already aware. Is there a new fix? Or what can I do? Any help would be great! Thanks.
Computer specs and CPU-Z validation...http://valid.canardpc.com/show_oc.php?id=2735621
Let me know if you need additional info.
I currently have a computer (Specs below) that has had the BSoD 0x50 message as well. I did some research and found it to be your software as you are already aware. Is there a new fix? Or what can I do? Any help would be great! Thanks.
Computer specs and CPU-Z validation...http://valid.canardpc.com/show_oc.php?id=2735621
Let me know if you need additional info.
Re: PAGE_FAULT_IN_NONPAGED_AREA
I'm having the exact same problem since I upgraded to FX-8350 and CT RC5. When I start Core Temp, it hangs while loading and soon after that PAGE_FAULT_IN_NONPAGED_AREA.
I previously used RC3 with FX-8120, installed 8350 and tried RC5 64-bit, it worked for a while but then I started getting this BSOD if I start Core Temp. I tried 32-bit, it worked but after a reboot got the same error. I then tried RC3 and it also worked once but after the next reboot it now gives the same error.
HWmonitor works fine.
I previously used RC3 with FX-8120, installed 8350 and tried RC5 64-bit, it worked for a while but then I started getting this BSOD if I start Core Temp. I tried 32-bit, it worked but after a reboot got the same error. I then tried RC3 and it also worked once but after the next reboot it now gives the same error.
HWmonitor works fine.
Re: PAGE_FAULT_IN_NONPAGED_AREA
I am having the same problem as you guys with fx6100. Hope a fix is soon as I will have to stop using coretemp if it keeps crashing me on system shutdown. It only happens when I am shutting my system down.
Chris
Chris
-
- New User
- Posts: 1
- Joined: Sun Jun 02, 2013 6:12 pm
Re: PAGE_FAULT_IN_NONPAGED_AREA
Receiving this same error in Win 8 64 bit.
Page Fault in Non Paged Area (ALsysIO64.sys) Fault.
Running Coretemp 1.0 RC5
CPU: AMD FX 8150 3.6 ghz
SSD: Samsung 840 120gb
MB: Asus Crosshair V Formula
I never had any issues with the previous release of Coretemp, but since I upgraded to RC5, it completely Blue Screens Win 8 and the only way around the issue is to completely uninstall Coretemp.
Is there an archive available to downgrade to RC4 or is there a fix in the works for this?
Seems like the issue is isolated to FX processors on both Win 7 and Win 8 64bit OS'.
Page Fault in Non Paged Area (ALsysIO64.sys) Fault.
Running Coretemp 1.0 RC5
CPU: AMD FX 8150 3.6 ghz
SSD: Samsung 840 120gb
MB: Asus Crosshair V Formula
I never had any issues with the previous release of Coretemp, but since I upgraded to RC5, it completely Blue Screens Win 8 and the only way around the issue is to completely uninstall Coretemp.
Is there an archive available to downgrade to RC4 or is there a fix in the works for this?
Seems like the issue is isolated to FX processors on both Win 7 and Win 8 64bit OS'.
Re: PAGE_FAULT_IN_NONPAGED_AREA
Found this forum searching for a solution to the exact same problem
Windows 8 Pro x64
FX-8350
Crosshair V Formula
12GB G.Skill 2133
BSOD on login, spent a while troubleshooting and disk checking, with no luck until finding a post saying it related to Coretemp RC5 - Disabled Coretemp in safemode and booted in normal mode and for the first time in 10+ boot attempts, it was fine
Weirdly, I have been using Coretemp on Win 8 for a few days fine, there was a few updates today for the OS but seeing as there are plenty of other people with the same problem I guess its not OS related ?
Would really appreciate a fix, coretemp is my friend with this mini nuclear plant FX chip
Windows 8 Pro x64
FX-8350
Crosshair V Formula
12GB G.Skill 2133
BSOD on login, spent a while troubleshooting and disk checking, with no luck until finding a post saying it related to Coretemp RC5 - Disabled Coretemp in safemode and booted in normal mode and for the first time in 10+ boot attempts, it was fine
Weirdly, I have been using Coretemp on Win 8 for a few days fine, there was a few updates today for the OS but seeing as there are plenty of other people with the same problem I guess its not OS related ?
Would really appreciate a fix, coretemp is my friend with this mini nuclear plant FX chip
Re: PAGE_FAULT_IN_NONPAGED_AREA
Same problem
WIN7 HOME 64-BIT
AMD A10-4600 APU
Page Fault in Non Paged Area (ALsysIO64.sys) Fault, running Coretemp 1.0 RC5
Could we somewhere found RC4 ? it was working fine ...
WIN7 HOME 64-BIT
AMD A10-4600 APU
Page Fault in Non Paged Area (ALsysIO64.sys) Fault, running Coretemp 1.0 RC5
Could we somewhere found RC4 ? it was working fine ...
-
- Registered User
- Posts: 8
- Joined: Sun Jun 09, 2013 3:17 pm
Re: PAGE_FAULT_IN_NONPAGED_AREA
Any news about a fix and is there a RC4 to download? Heard that its working OK for some. I have a A10 5800K. Thanks
- The Coolest
- Site Admin
- Posts: 3379
- Joined: Tue Feb 18, 2003 7:48 pm
- Location: Tel Aviv, Israel
- Contact:
Re: PAGE_FAULT_IN_NONPAGED_AREA
The next version is in the works and should be out very soon.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.
Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.
Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
Re: PAGE_FAULT_IN_NONPAGED_AREA
any news yet on rc6 with a fix for that error?
and any chance to implement trinity cpus in the supported list?
i mean im using rc5 with an offset of 33°C for my x4 750k (found that one out through the overclocking tool of asrock), but i would really like to get rid of that occassional crash instead of considering uninstalling this wonderful tool.
and any chance to implement trinity cpus in the supported list?
i mean im using rc5 with an offset of 33°C for my x4 750k (found that one out through the overclocking tool of asrock), but i would really like to get rid of that occassional crash instead of considering uninstalling this wonderful tool.
Re: PAGE_FAULT_IN_NONPAGED_AREA
I have the same problem since I installed Samsung 840 pro
Corsair and never before had no problem
In addition, the motherboard is no longer beeps at startup
happens to you?
amd fx 8350
asus M5A99X evo
Corsair and never before had no problem
In addition, the motherboard is no longer beeps at startup
happens to you?
amd fx 8350
asus M5A99X evo
Re: PAGE_FAULT_IN_NONPAGED_AREA
I am also getting this problem
CPU: AMD FX 8350 4.0 ghz
Motherboard: Asus M5A99FX
Window 7 Pro Sp1
If there is there a current work around other than disabling Core Temp? I also noted the following
1) The problem did not occur with a fresh install of window 7 sp1 but did occur on the first restart after running windows update.
2) I can start Core temp manually without an immediate crash, i have not tried to leave it running though.
CPU: AMD FX 8350 4.0 ghz
Motherboard: Asus M5A99FX
Window 7 Pro Sp1
If there is there a current work around other than disabling Core Temp? I also noted the following
1) The problem did not occur with a fresh install of window 7 sp1 but did occur on the first restart after running windows update.
2) I can start Core temp manually without an immediate crash, i have not tried to leave it running though.
Re: PAGE_FAULT_IN_NONPAGED_AREA
I use win 8 and I also believe it is the fault of windows update
Have you Samsung ssd 840 pro 256?
In addition to not run core temp does not work either the motherboard beeps at startup
Have you Samsung ssd 840 pro 256?
In addition to not run core temp does not work either the motherboard beeps at startup
Re: PAGE_FAULT_IN_NONPAGED_AREA
I use a ssd but its a san disk 480robyip wrote:I use win 8 and I also believe it is the fault of windows update
Have you Samsung ssd 840 pro 256?
In addition to not run core temp does not work either the motherboard beeps at startup
Re: PAGE_FAULT_IN_NONPAGED_AREA
I put a crosshair V FZ but the problem remained
Re: PAGE_FAULT_IN_NONPAGED_AREA
Just to confirm that I have the exact same issues on my system using an FX-8350 and CHV Formula-Z.
-
- New User
- Posts: 1
- Joined: Mon Jul 29, 2013 10:30 am
Re: PAGE_FAULT_IN_NONPAGED_AREA
i'm also having this problem, asus m5a97 and 8350. any update? thanks!