Core Temp 1.0 locks up after hibernate

Post about bugs you find in Core Temp so they can be addressed and fixed efficiently
Post Reply
bbbl67
Registered User
Registered User
Posts: 10
Joined: Mon Dec 05, 2011 3:34 pm

Core Temp 1.0 locks up after hibernate

Post by bbbl67 »

I'm running Core Temp 1.0 on a Phenom II 1100T BE processor system, under Windows 7 Ultimate 64-bit. It locks up after resuming from hibernate mode. It is fine if it resumes from Sleep mode, but this only happens after resuming from Hibernate.

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: Core Temp 1.0 locks up after hibernate

Post by The Coolest »

Are you using the latest 1.0 RC3 version?
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

bbbl67
Registered User
Registered User
Posts: 10
Joined: Mon Dec 05, 2011 3:34 pm

Re: Core Temp 1.0 locks up after hibernate

Post by bbbl67 »

The Coolest wrote:Are you using the latest 1.0 RC3 version?
According the "About", it just says 1.0 with no RC-anything shown. Where can I find the RC version number?

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: Core Temp 1.0 locks up after hibernate

Post by The Coolest »

That means that you're using an old version which has a bug.
Update to RC3 and it should fix the problem.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

bbbl67
Registered User
Registered User
Posts: 10
Joined: Mon Dec 05, 2011 3:34 pm

Re: Core Temp 1.0 locks up after hibernate

Post by bbbl67 »

The Coolest wrote:That means that you're using an old version which has a bug.
Update to RC3 and it should fix the problem.
Okay, thanks, so far so good, it came back from the Hibernate without any issues, once so far.

Post Reply

Return to “Bug reports”