Systray only shows one core temp on start

Post about bugs you find in Core Temp so they can be addressed and fixed efficiently
Post Reply
bruce73
Registered User
Registered User
Posts: 3
Joined: Sun Nov 20, 2011 4:28 pm

Systray only shows one core temp on start

Post by bruce73 »

I don't know if this is a bug or not, but when CoreTemp is first started (I have it set to auto-start with Windows), only one of the two cores' temp is listed in the systray. I can fix this by going into Settings > system tray > tray icons and toggling from "All Cores" to "Highest Temp" and back to "All Cores." Maybe I'm missing another setting somewhere that would keep this from happening.

I'm running Win 7/64 with an Intel i3-2130 @ 3.40/3.40. CoreTemp is version 1.0 (64 bit).

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: Systray only shows one core temp on start

Post by The Coolest »

This is a bug, and it will be fixed in the upcoming release of Core Temp.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

bruce73
Registered User
Registered User
Posts: 3
Joined: Sun Nov 20, 2011 4:28 pm

Systray only shows one core temp on start

Post by bruce73 »

Thanks for confirming.

User avatar
Arriviste
New User
Posts: 1
Joined: Tue Dec 06, 2011 5:01 am
Location: CST, US

Re: Systray only shows one core temp on start

Post by Arriviste »

Hi, all,
Came here to seek info about the solo core temp when two have been the norm. Read the thread and registered to say that I'm happy to hear that a fix is in the works.

Thanks!

Post Reply

Return to “Bug reports”