Hello Core Temp people and supporters, here is my friendly request!
Core Temp 0.99.8 only reads CPU Speed and load on a Asus M4A77TD PRO
(?) for almost every other sensor otherwise wrong readings .
Asus PC Probe II http://www.techspot.com/downloads/265-a ... probe.html
Asus M4A77TD PRO http://www.asus.com/Motherboards/AMD_AM3/M4A77TD_PRO/
I have read the FAQ and posted here after no personal resolve.
Now i understand that ACC enabled stops Core Temp from reading correctly!
but Asus Pc Probe II reads correctly therefore i feel sensors are available to be read by Core Temp.
is this a possibility that Core Temp Developers can add these sensors to a future release.
Core Temp allows this data to viewed on my Logitech G510 LCD , Asus Pc Probe II does not
Thank you for any response, i would love to use this brilliant app.
Asus M4A77TD PRO (?) only reads CPU Speed.
Re: Asus M4A77TD PRO (?) only reads CPU Speed.
I hope this may be of help, Speedfan has located the sensor in use:
thank you.
thank you.
- The Coolest
- Site Admin
- Posts: 3379
- Joined: Tue Feb 18, 2003 7:48 pm
- Location: Tel Aviv, Israel
- Contact:
Re: Asus M4A77TD PRO (?) only reads CPU Speed.
That's is exactly the problem. It's because of ACC.
Core Temp at this stage doesn't support motherboard based sensors, this is what SpeedFan and Pc Probe use.
There's a slight chance that the next version might work, since Thermalzone support was added to it, but it's usually not supported on most enthusiast desktop boards.
Core Temp at this stage doesn't support motherboard based sensors, this is what SpeedFan and Pc Probe use.
There's a slight chance that the next version might work, since Thermalzone support was added to it, but it's usually not supported on most enthusiast desktop boards.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.
Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.
Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
Re: Asus M4A77TD PRO (?) only reads CPU Speed.
thanks for your response, i hope the next version resolves this - as i cannot find a better application for my needs.
all the best!
all the best!