pop on desktop

Post about bugs you find in Core Temp so they can be addressed and fixed efficiently
Post Reply
jordanis
New User
Posts: 2
Joined: Wed May 11, 2011 10:07 am

pop on desktop

Post by jordanis »

hello to the community.

i just built a new system with amd cpu and every time i start core temp , a notepad coretemp icon and plugin icon pops on desktop.
how can I eliminate this?
your advice will be appreciated.

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Re: pop on desktop

Post by The Coolest »

Hello and welcome.

You can't, as these are Core Temp's configuration files.
I suggest putting Core Temp in a folder somewhere on your hard-drive and creating a shortcut for it on your desktop, that way you won't get the config files popping up every time, and the settings you make in Core Temp will be saved.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

jordanis
New User
Posts: 2
Joined: Wed May 11, 2011 10:07 am

Re: pop on desktop

Post by jordanis »

The Coolest wrote:Hello and welcome.

You can't, as these are Core Temp's configuration files.
I suggest putting Core Temp in a folder somewhere on your hard-drive and creating a shortcut for it on your desktop, that way you won't get the config files popping up every time, and the settings you make in Core Temp will be saved.

thanks. that's it

imposter
Moderator
Moderator
Posts: 154
Joined: Sun Mar 06, 2005 5:07 pm
Location: NYC
Contact:

Re: pop on desktop

Post by imposter »

Alternatively you can use the coretemp installer version :ranger:

Post Reply

Return to “Bug reports”