Page 1 of 1
Q6600 B3
Posted: Sun Jun 29, 2008 12:41 pm
by kerberos
i have intel Q6600 B3 ,motherboard Asus striker extreme, heat sink Thermalright Ultra 120 Extreme, Thermal compound Arctic Cooler MX-2
Idle temp Room Temp 25'c , core temp 0.99
core 1 = 43'c
core 2 = 43'c
core 4 = 42'c
core 5 = 44'c
Heat sink mounted with scythe Kaze juyani 110CFM fan. is these temprature readings okay
Posted: Mon Jun 30, 2008 12:55 am
by The Coolest
Is that the idle temperature?
It is possible that your CPU has a TjMax of 85C, so core temp is just overreporting.
What does your normal temperature monitors say?
Q6600
Posted: Mon Jun 30, 2008 6:55 am
by kerberos
yes all are idle temp
Tj sets at 100
Posted: Mon Jun 30, 2008 5:11 pm
by The Coolest
TjMax may be 85 - 90C on your chip. try to play with TjMax offset.
Posted: Thu Jul 17, 2008 4:53 pm
by kerberos
Tjmax sets to 0 let me post screen shot
[/img]
Posted: Thu Jul 17, 2008 7:08 pm
by The Coolest
You can adjust it in the Options --> Settings menu.
Posted: Thu Jul 17, 2008 7:24 pm
by kerberos
It take TJmax automatically 100 if you can see my screenshot, if i set tjmax 85 or 90 temprature all cores above 120'c
Posted: Thu Jul 17, 2008 7:26 pm
by The Coolest
To lower TjMax you logically use the - sign.
-10
for example
The setting is an offset adjustment, not a manual way to set a new TjMax.
Posted: Thu Jul 17, 2008 7:44 pm
by kerberos
Posted: Thu Jul 17, 2008 7:45 pm
by The Coolest
for TjMax of 90C set it to -10 in the settings.
Posted: Thu Jul 17, 2008 8:51 pm
by kerberos
here after settings -10
Posted: Thu Jul 17, 2008 10:10 pm
by The Coolest
Well that looks OK, no?
Posted: Fri Jul 18, 2008 5:18 pm
by kerberos
lol -20 show lesser temprature then -10 please buddy i am serious
Posted: Fri Jul 18, 2008 5:35 pm
by The Coolest
I don't understand what do you want?
Posted: Fri Jul 18, 2008 5:42 pm
by kerberos
i want to know what Tj MAX should i set for my Intel Q6600 B3 or by default settings are correct which is sets to 0
Posted: Fri Jul 18, 2008 5:50 pm
by The Coolest
I don't know, some believe it's 85-90C for the TjMax for B3. (So Core Temp needs to be set to -10 to -15)
Posted: Fri Jul 18, 2008 7:58 pm
by kerberos
but not default 100 right ?