Win7 high temps compared to xp

Report any bugs you have with the program, so they can be fixed.

Moderator: imposter

Post Reply
CoreTemp-User191
Registered User
Registered User
Posts: 3
Joined: Thu Jan 01, 1970 12:00 am

Win7 high temps compared to xp

Post by CoreTemp-User191 »

Hi,
Just a quicky why does your core temp beta version 0.99.5.20 32 bit show 12 degrees higher in windows 7 (50deg) for all 4 cores on my Q6600 go against my xp pro sp3 (38 deg)

Both xp and win 7 rc are using the same beta program so why the 12 deg jump from xp to win 7?? Or is there another version that has sorted this discrepency??

Many Thanks

Ian Jones

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Post by The Coolest »

Not quite sure why that would happen except you may have set an "offset" in XP or in Windows 7.
Also make sure that you have 0.99.5.20 in both OSes.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

CoreTemp-User191
Registered User
Registered User
Posts: 3
Joined: Thu Jan 01, 1970 12:00 am

Post by CoreTemp-User191 »

Hi again,
no can't understand the temp difference at all between xp and win7 both core temp programs are identical with identical settings configured no offsetts have been specified in xp or win7 but I still get wildly different temp readings from one os to another I would like to believe xp's readings as they are lower and better for the logevity of my cpu however it has me a little worried now which temp readings are accurate xp's lower temps or win7's higher potentially TOO high temps could someone please point me in the right direction

Many Thanks

Post Reply

Return to “Core Temp - Bug reports”