ALCPU Forums

Posted: **Wed Apr 01, 2009 8:45 pm**

hi
i download core temp and start it but my temp is 0 celsius and dont change
why??

Posted: **Wed Apr 01, 2009 9:37 pm**

What processor do you have? Please upload a screenshot (Tools menu --> screenshot)

Posted: **Thu Apr 02, 2009 5:07 pm**

here is

Posted: **Thu Apr 02, 2009 9:45 pm**

My only suggestion would be to try the new beta and see if it solves the problem (please let me know).
Beta: http://www.alcpu.com/forums/viewtopic.php?t=571
If it doesn't then it's a DTS problem in your CPU, and it's just deactivated on your processor.

Posted: **Fri Apr 03, 2009 3:32 pm**

its same again

:S

Posted: **Tue Apr 07, 2009 4:34 pm**

http://www.flickr.com/photos/19461356@N03/3420908723/
http://www.flickr.com/photos/19461356@N03/3420908603/

The first is a screenshot of version 0.99.0. It has always read 49C, but I just started using it, so I assume it will change under load.

The second is a screenshot of version 0.99.4. It has always read 0C with a ?. Not sure why. Just started using it today as well.

Any insight? Based on what I have seen thus far.......

Posted: **Tue Apr 07, 2009 6:08 pm**

0.99.0 reads -49C, not 49C. The processor's DTS is not working.
0.99.4 uses a different way to calculate and display the temperature. "?" means the value reported temp could not be validated, and is assumed to be incorrect.

Posted: **Tue Jul 07, 2009 1:54 pm**

Next release may fix this issue, so be prepared to test it out soon

ALCPU Forums

My temp is 0

My temp is 0

I have same issue with 0.99.4