Indicate with the T7600 too low?
Posted: Tue Sep 09, 2008 9:45 am
Hi!
Sorry for my bad english.
I use the current version of core temp 0.99.3 on the Main board AOpen i975Xa-YDG of AOpen. Whereupon a mobile Intel core puts 2 duo T7600 (Merom). In the no-load operation core temp indicates a temperature of approximately 30-35 degrees.
For some days I use the program BOINC for the project Seti@home. Thus the processor runs on full achievement. Strange to say however the processor temperature does not increase, but it is reduced.
Looks current in such a way:
Bye
Sorry for my bad english.
I use the current version of core temp 0.99.3 on the Main board AOpen i975Xa-YDG of AOpen. Whereupon a mobile Intel core puts 2 duo T7600 (Merom). In the no-load operation core temp indicates a temperature of approximately 30-35 degrees.
For some days I use the program BOINC for the project Seti@home. Thus the processor runs on full achievement. Strange to say however the processor temperature does not increase, but it is reduced.
Looks current in such a way:
I am confused.Core#0: 15°C to Tjunction max remaining / 100% load
Core#1: 23°C to Tjunction max remaining / 100% load
Bye