Page 1 of 1

Indicate with the T7600 too low?

Posted: Tue Sep 09, 2008 9:45 am
by CoreTemp-User036
Hi! 8)

Sorry for my bad english. :roll:

I use the current version of core temp 0.99.3 on the Main board AOpen i975Xa-YDG of AOpen. Whereupon a mobile Intel core puts 2 duo T7600 (Merom). In the no-load operation core temp indicates a temperature of approximately 30-35 degrees.

For some days I use the program BOINC for the project Seti@home. Thus the processor runs on full achievement. Strange to say however the processor temperature does not increase, but it is reduced. :eek:
Looks current in such a way:
Core#0: 15°C to Tjunction max remaining / 100% load
Core#1: 23°C to Tjunction max remaining / 100% load
I am confused. :)

Bye

Posted: Tue Sep 09, 2008 10:01 pm
by The Coolest
What you see there is the distance to TjMax. Meaning how close your processor is to the maximum "allowed" temperature.
Your temperature is still safe, considering this is a mobile processor and these are designed to cope with the heat, but if possible, I would consider to upgrade the cooling.

Posted: Wed Sep 10, 2008 3:05 am
by CoreTemp-User036
Good mornings! 8)

Now I see it also in the attitudes. There the problem probably sat before the screen. :oops:

Bye