Incorrect Temps on Brisbane 4000+ ?

Report any bugs you have with the program, so they can be fixed.

Moderator: imposter

Post Reply
SirFunk
New User
Posts: 1
Joined: Fri Mar 23, 2007 11:04 pm

Incorrect Temps on Brisbane 4000+ ?

Post by SirFunk »

It seems that Core Temp 0.95 is reporting abnormally low temps for my 4000+ It's reporting one core at 6 and the other at 9c Idle, While Speedfan off my board sensors shows 44c. Under load Core Temp raises (QUICKLY.. like after 2 seconds) to 17/23ish.. and stays there while the board monitors get to around 52. Is there any reason for this? Any more info i could provide to help sort this out?

Thanks.

Post Reply

Return to “Core Temp - Bug reports”