Opteron 170 only showing one core??

Report any bugs you have with the program, so they can be fixed.

Moderator: imposter

Post Reply
Guest

Opteron 170 only showing one core??

Post by Guest »

Ok, I have an Opty 170 and this little program of yours is oly showing Processor #1.

The Select Processor tab is greyed out? with Processor #1 writen in it.

Anyone have any ideas?

Guest

Post by Guest »

On a side note? Should I run this when overclocked or only at defaults?

O.

User avatar
The Coolest
Site Admin
Site Admin
Posts: 3379
Joined: Tue Feb 18, 2003 7:48 pm
Location: Tel Aviv, Israel
Contact:

Post by The Coolest »

The reason the program only shows one CPU is because these values are located in the CPU memory controller, and not the cores themselves.
And for this reason the programs searches physical CPUs, and only shows one CPU even if its a dual core.
On a dualie setup, be it single core or dual core, the program will only show 2 CPUs.

Regarding running it OCed or stock, it doesn't matter, the voltage it reads is the stock voltage (not the one you chose in BIOS), so its a static value. So is the TCaseMax value which is static as well, so it doesn't really matter when your run it. The important values will always be the same.
Main rig:
AMD Ryzen 9 5950X (True Spirit 140 Direct) / Mobo: Asrock Fatal1ty X470 / EVO 970 500GB + WD Blue 250GB + HDD / GPU: Dell RX 570 4GB / Mem: 2x16GB DDR4-3200 G.Skill 32GTZKW TridentZ - 32GB total / PSU: Seasonic Prime Ultra Gold 650W
NAS:
Core i7 2600K 3.4GHz @ 4.3GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / 2x Inland Pro 120GB + HDDs / GPU: ATi Mach64 VT2 / Mem: 4x4GB DDR3-1600 G.Skill 8GBXL RipJawsX - 16GB total / PSU: Seasonic S12II 620W.
Secondary rigs:
Core i3 7130U / MiniPC / SanDisk SDSSDP-128G / GPU: Intel HD 620 / Mem: 1x8GB DDR3L-1600
Xeon X3430 2.40GHz @ 3.06GHz or Core i3 540 3.06GHz @ 4.0GHz (Freezer 7 Pro) / Mobo: MSI H55M-ED55 / PNY CS1111 240GB / GPU: ATI FirePro V3800 / Mem: 4x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 8GB total / PSU: Seasonic S12II 620W
AMD Phenom II X4 B93 / Mobo: ASUS M2A-VM / GPU: ATI Radeon Xpress X1250 / Crucial M4 120GB / Mem: 2x2GB DDR2-800 - 4GB total / PSU: Antec 380W.

Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors

Post Reply

Return to “Bug reports”