command line (ghost mode) does not set voltage
Posted: Tue Sep 20, 2005 3:11 pm
Hi,
First of all this is a cool program. Secondly, I made the string below in order to automize startup. I found out that the multiplier was set but not the voltage. ( The 0.975 volt works well when set from the program.)
"C:\MAGIX\GCPUID.exe" -multi=(8) -volt=(0.975) -ghost
This seems like a small bug to me.
Thanks
-pat
First of all this is a cool program. Secondly, I made the string below in order to automize startup. I found out that the multiplier was set but not the voltage. ( The 0.975 volt works well when set from the program.)
"C:\MAGIX\GCPUID.exe" -multi=(8) -volt=(0.975) -ghost
This seems like a small bug to me.
Thanks
-pat