ALCPU Forums

Yes I seam to have good air flow, All my extra wires are tied out of the way and I have 3 Fans on the case alone. One 10cm pulling air from the front over the hard drives to the back. One 10cm at the back pulling air out of the case, and one 6cm fan on the side I drawing air out of the case. My LM90...

Ok i reset the HSF and followed all the directions exactly. No change in heat... Still 40c with no overclock. I have no idea what to think.

40c !!! I wish my temps got that low. I run 39c when my cool n quite settings are on and my proccessor is at 1.0 - 1.3 ghz. I think maybe i have my HSF on wrong or had too much thermal grease on there. Ive got one of those big zalman fans and arctic silver paste. Im going to try to re-seat and re-ap...

Specs 9 x 265 @ 600 HTT, Ram set too DDR333 (sometimes it wont boot at 400??? can i fix that somehow) Here are my Temps With P95 Small FFT = 62 Large FFT = 61 Without P95 = 43 http://www.destinydominion.ca/jreeve0805/load.jpg (small FFT) http://www.destinydominion.ca/jreeve0805/noload.jpg It runs st...

i can get this cpu all the way up to 2.4 ghz stable but i have to drop the HTT down to 600 rather than 1000... When I do that is there any real speed advantage? (9 x 200... HTT 1000) VS. (9 x 266 ... HTT 600) What is the proper way to overclock for best results? Does raw clock speed Always mean bett...

Ok here is my friends athlon that I just built... its only 2 days old

http://www.destinydominion.ca/jreeve0805/cputemp2.jpg

Here is my Venice CPU bought from NCIX.com in June.. is this good or what?


http://www.destinydominion.ca/jreeve0805/cputemp.jpg